Installation guide

18
7. Reinstall latch on opposite side
Using a T25
®
screwdriver, reinstall the latch plate on the
opposite side from which it was removed with the four screws
removed earlier.
6. Remove latch
Flip and rotate the inner door 180° so that the thin section is
at the top and the thick section is at the bottom. Using a T25
®
screwdriver, remove the four screws securing the latch plate
in place.
8. Reinstall hinge assembly on opposite side
Flip over the inner door to the left. Using a T20
®
screwdriver,
reinstall the hinge assembly on the opposite side from which
it was removed.
DOORS WITH LCD SCREEN:
9. Remove rotating assembly
Lift off inner door assembly. Using a Phillips screwdriver,
remove the two screws securing the rotating assembly
to the door.
Latch
Thin section
Thick section