Specifications

11
FIG. 12
Step 4 - Install Storage Tank
INSTALL STORAGE TANK
1. Apply thread sealing tape to the threads on the nipple
at the top of the tank. See Fig 12.
2. Locate the tubing connector. Hand tighten the tubing
connector onto the tank nipple being careful not to
cross thread. See Fig 12.
3. Tighten the adapter 1/4 turn with a wrench.
See Fig 12.
4. Set the tubing insert and nut aside for now. See Fig
12. Do not connect the tube at this time. This will occur
later in the assembly.
5. Place the storage tank next to the Reverse Osmosis
Assembly. The tank can be placed upright or on its
side.
Storage Tank
Tubing Connector
Tank Nipple
Questions? Visit www.whirlpool.com or call Toll Free 1-866-986-3223
Tubing Insert
Tubing Nut