Specifications

Customizing Features/Options -- Model WHES20

Recharge

Recharge button is used to initiate an immediate recharge.

• Press and hold the

RECHARGE button until the words “RECHARGE NOW” flashes

in the display, and the softener enters the fill cycle of regeneration right away.

“RECHARGE NOW ” will f lash during the regeneration. When over, full water

conditioning c apacity is restored.

RECHARGE NOW Initiated

NOTE:

Avoid using hot water while the conditioner is regenerating, because the water heater will

refill with bypass hard water.

Recharge Tonight

If you do not want to start an imme diate recharge, but would like an extra re charge at the next pr eset

recharge time, do the following to schedule a recharge.

• Press and release (do not hold) the

RECHARGE button. The words “ RECHARGE

TONIGHT” flashes in the display, and the softener will recharge at the next recharge time.

“RECHARGE NOW ” will f lash during the regeneration. When over, full water

conditioning c apacity is restored.

RECHARGE TONIGHT Initiated

‘‘Power---Outage Memory’’

If electrical power to the water softener is lost, ‘‘memory’’ built into the timer circuitry will keep all

settings f or up to eight hours. While the power is out, the display is blank a n d the water softener will

not r egenerate. Whe n electrical powe r is restored, the following will oc cur.

1. You have to reset the p resent time only if the display is flashing. The HA RDNESS and

RECHARGE TIME never require resetting unless a change is desired. Even if the clock is

incorrect after a long power outage, the sof tener works as it should to keep your wate r soft.

However, regenerations may occur at the wrong time of day until you reset the clock to the correc t

time of day.

NOTE:

If the water softener was regenerating when power was lost, it will now finish the cycle.