User's Manual

Program the Water Softener

SET SALT LEVEL button Display

TANK LIGHT button

UP button

RECHARGE button

GRAM

TRESS TO SCHEDULE

HOLD TO START

_ECHARGE

/ \

PROGRAM button DOWN Button

Figure 10

If you have questions about installation, programming, operating and routine maintenance...

call 1-866-986-3223, Monday - Friday, 8 am to 9 pm, EST.

Set Time of Day

When the water softener is plugged in, a model code and a test number (example: J1.0), begin to flash

) " •

in the faceplate display. Then, "12:00 PM" and the ",w rds CURRENT TIME" begin to flash.

NOTE: If .... shows in the display, press the UP _ or DOWN _ until LE40 shows

in the display. Then, press the O PROGRAM button to set, and change to the

flashing "CURRENT TIME" display.

If the words "CURRENT TIME" do not show in the display, press the O PROGRAM button until

they do.

1. Press the _ Up or _ Down buttons to set the present time. Up sets the display ahead; down

sets the time back.

U'£O,.

l.gO

C_nt

Time

# m.3c

I /.gO

C_nt

Time

Be sure AM or PM is correct.

NOTE: Press buttons and quickly release to slowly advance the display. Hold the buttons

down for fast advance. This procedure applies for all following settings.