Installation Instructions

NOTE: If the dryer and pedestal assembly is located in a garage,

15.5" (39.4 cm) must be added under the pedestal so that the

dryer is 18" (46 cm) above the garage floor.

PEDESTAL SAFETY

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools

listed here.

Tools needed

■ utility knife

■ 1/4" hex head ratchet or open-end wrench

■ 5/16" hex head ratchet or open-end wrench

■ 14 mm open-end wrench

■ level

■ 9/16" open-end wrench

■ pliers or slip-joint pliers

■ bucket

Parts supplied

■ four #12 x 5/8" hex head sheet metal screws (in parts bag)

■ two adjustable feet (in parts bag)

■ Installation Instructions

NOTE: If the pedestal is to be installed under a washer, use the

feet that were factory installed on the washer for the pedestal

installation, and save the two adjustable feet supplied in the parts

bag for use with dryer pedestal installation.

TABLE OF CONTENTS

PEDESTAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

INSTALLATION REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Tools and Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Location Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Before Installing the Pedestal . . . . . . . . . . . . . . . . . . . . . . . .3

INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Installing the Pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Complete the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .5

COMMERCIAL PEDESTAL WARRANTY . . . . . . . . . . . . . . . . . . . . . . .6

INSTALLATION REQUIREMENTS

Location Requirements