Instructions for use WASHING MACHINE Contents GB English,1 ES Español, !% F Français, 13 GR ÅËËÇÍÉÊÁ, 49 DE Deutsch, 25 HU Magyar, 61 GB Installation, 2-3 Unpacking and levelling, 2 Electric and water connections, 2-3 The first wash cycle, 3 Technical details, 3 Washing machine description, 4-5 Control panel, 4 Leds, 5 Starting and Programmes, 6 Briefly: how to start a programme, 6 Programme table, 6 Personalisations, 7 WIXL 105 Setting the temperature, 7 Setting the spin speed, 7 Functions, 7
Installation Keep this instruction manual in a safe place for future reference. Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the washing machine to inform the new owner as to its operation and features. GB Read these instructions carefully: they contain vital information on installation, use and safety. Levelling your appliance correctly will provide it with stability and avoid any vibrations, noise and shifting during operation.
Connecting the drain hose The power supply cable must never be bent or dangerously compressed. The power supply cable must only be replaced by an authorised serviceman. Once the appliance has been installed, and before you use it for the first time, run a wash cycle with detergent and no laundry, setting the 90°C programme without a pre-wash cycle. Before plugging the appliance into the mains socket, make sure that: the socket is earthed and in compliance with the applicable law; Dimensions 59.
Washing machine description Control panel GB FUNCTION Buttons Leds ON-OFF/ DOOR ON-OFF LOCK Button Led PROGRAMME Knob Detergent dispenser START/RESET Button TEMPERATURE SPIN SPEED Knob Knob Detergent dispenser: to add detergent and fabric softener (see page 8). TEMPERATURE knob: to set the temperature or the cold wash cycle (see page 7). LEDS: to find out which wash cycle phase is under way.
Leds Delay set: If the Delay Timer function has been enabled (see page. 7), once you have started the programme, the LED corresponding to the delay set will begin to flash: Cycle phase under way: During the wash cycle, the LEDs gradually illuminate on to indicate the cycle phase under way: Prewash Wash Spin cycle Note: during draining, the LED corresponding to the Spin cycle phase will be turned on. Once the set delay is complete, the flashing LED will turn off and the programme set will start.
Starting and Programmes Briefly: starting a programme GB 6. Add the detergent and any fabric softener (see page 8). 7. Start he programme by pressing the START/RESET button. To cancel it, keep the START/RESET button pressed for at least 2 seconds. 8. When the programme is finished, the ON-OFF/ DOOR LOCK Led will flash to indicate that the appliance door can be opened. Take out your laundry and leave the appliance door ajar to allow the drum to dry thoroughly. Turn the washing .
Personalisations Setting the temperature GB Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6). The temperature can be lowered, or even set to a cold wash ( ). Installation Setting the spin speed Functions Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set. F u n c tio n E ffe ct D e la y T im er E a s y iro n In cr ea s e s t h e e f f ic ie n c y o f t h e rin s e . A ll N .B .
Detergents and laundry Detergent dispenser GB Good washing results also depend on the correct dose of detergent: adding too much detergent won't necessarily make for a more efficient wash, and may in fact cause build up on the interior of your appliance and even pollute the environment. 4 1 2 3 Open up the detergent dispenser and pour in the detergent and fabric softener, as follows.
Precautions and advice General safety This appliance has been designed for nonprofessional, household use and its functions must not be changed. separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected.
Care and maintenance Cutting off the water or electricity supply GB Turn off the water tap after every wash. This will limit the wear of your appliance's water system and also prevent leaks. Unplug your appliance when cleaning it and during all maintenance operations. Cleaning your appliance The exterior and rubber parts of your appliance can be cleaned with a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Troubleshooting Your washing machine could fail to work. Before calling for Assistance (see page 12), make sure the problem can't easily be solved by consulting the following list. The water inlet hose is not connected to the tap. The hose is bent. The water tap is not turned on. There is a water shortage. The water pressure is insufficient. The START/RESET button has not been pressed. The washing machine continuously loads and unloads water.
Service Before calling for Assistance: Check whether you can solve the problem on your own (see page 11); Restart the programme to check whether the problem has been solved; If this is not the case, contact an authorised Technical Service Centre on the telephone number provided on the guarantee certificate. GB Always request the assistance of authorised servicemen. Service Notify the operator of: the type of problem; the appliance model (Mod.); the serial number (S/N).
Mode d'emploi LAVE-LINGE Sommaire F Français F Installation, 14-15 Déballage et mise à niveau, 14 Raccordements hydrauliques et électriques, 14-15 Premier cycle de lavage, 15 Caractéristiques techniques, 15 Description du lave-linge, 16-17 Bandeau de commandes, 16 Voyants, 17 Mise en marche et Programmes, 18 En bref: démarrage d'un programme, 18 Tableau des programmes, 18 Personnalisations, 19 WIXL 105 Sélection de la température, 19 Sélection de l'essorage, 19 Fonctions, 19 Produits lessiviels et
Installation Conservez ce mode d'emploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, veillez à ce qu'il suive toujours le lave-linge pour que son nouveau propriétaire soit informé sur son mode de fonctionnement et puisse profiter des conseils correspondants. F Lisez attentivement les instructions: elles fournissent d'importantes informations sur l'installation, l'utilisation et la sécurité. Déballage et mise à niveau Déballage 1. Déballez le lave-linge. 2.
Raccordement du tuyau de vidange F Le câble ne doit être ni plié ni écrasé. Installation 65 - 100 cm Raccordez le tuyau d'évacuation, sans le plier, à un conduit d'évacuation ou à une évacuation murale placés à une distance du sol comprise entre 65 et 100 cm; Le câble d'alimentation ne doit être remplacé que par des techniciens agréés. Attention! Nous déclinons toute responsabilité en cas de non respect des normes énumérées ci-dessus.
Description du lave-linge Bandeau de commandes F Touches Voyants FONCTION Touche Voyant ALLUMAGE/ HUBLOT VERROUILLE MISE EN MARCHE/ ARRET Bouton Tiroir à produits lessiviels Touche PROGRAMMES START/RESET Bouton ESSORAGE Bouton TEMPÉRATURE Tiroir à produits lessiviels: chargement des produits lessiviels et additifs (voir page 20). Bouton TEMPÉRATURE: sélection de la température ou lavage à froid (voir page 19). Voyants: suivi du stade d'avancement du programme de lavage.
Voyants Retard programmé: Si la fonction Départ différé a été activée (voir page 19) et après avoir sélectionné le programme, le voyant correspondant au retard programmé commence à clignoter: F Phases en cours: Pendant le cycle de lavage, les voyants s'allument progressivement pour indiquer son stade d'avancement: Installation Les voyants fournissent des informations importantes.
Mise en marche et Programmes En bref: démarrage d'un programme F 5. Sélectionnez la vitesse d'essorage (voir page 19). 6. Versez le produit lessiviel et les additifs (voir page 20). 7. Appuyez sur la touche START/RESET pour lancer le programme. Pour annuler, poussez sur la touche START/RESET pendant 2 secondes au moins. 8. A la fin du programme de lavage, le voyant ALLUMAGE/ HUBLOT VERROUILLE clignote pour indiquer que le hublot peut être ouvert.
Personnalisations Sélection de la température Sélection de l'essorage Description Tournez le bouton ESSORAGE pour sélectionner la vitesse d'essorage du programme sélectionné. Les vitesses maximales prévues pour les programmes sont: Programmes Vitesse maximale Coton 1000 tours minute Synthétiques 800 tours minute Laine 600 tours minute Soie no .
Produits lessiviels et linge Tiroir à produits lessiviels F Un bon résultat de lavage dépend aussi d'un bon dosage de produit lessiviel: un excès de lessive ne lave pas mieux, il incruste l'intérieur de votre lavelinge et pollue l'environnement. 4 1 2 3 Sortez le tiroir à produits lessiviels et versez la lessive ou l'additif comme suit. bac 1: Lessive prélavage (en poudre) Avant d'introduire la lessive, assurez-vous que le bac supplémentaire 4 n'est pas présent.
Précautions et conseils Sécurité générale Ce lave-linge ne doit être utilisé que par des adultes en suivant les instructions reportées dans ce mode d'emploi. Ne tirez jamais sur le câble pour débrancher la fiche de la prise de courant. Ne forcez pas pour ouvrir le couvercle: le verrouillage de sécurité qui protège contre les ouvertures accidentelles pourrait s'endommager. Avant d'introduire votre linge, contrôlez si le tambour est bien vide.
Entretien et soin F Coupure de l'arrivée d'eau et de courant Nettoyage de la pompe Fermez le robinet de l'eau après chaque lavage: vous limiterez ainsi l'usure de l'installation hydraulique de votre lave-linge et éliminerez le danger de fuites. Le lave-linge est équipé d'une pompe autonettoyante qui n'exige aucune opération d'entretien. Il peut toutefois arriver que de menus objets (pièces de monnaie, boutons) tombent dans la préchambre qui protège la pompe, placée en bas de cette dernière.
Anomalies et remèdes Il peut arriver que le lave-linge ne fonctionne pas bien. Avant de appelez le Service après-vente (voir page 24), contrôlez s'il ne s'agit pas d'un problème facile à résoudre grâce à la liste suivante. F Causes / Solutions possibles: Le lave-linge ne s'allume pas. La fiche n'est pas branchée dans la prise de courant ou mal branchée. Il y a une panne de courant. Le cycle de lavage ne démarre pas. Le hublot n'est pas bien fermé. La touche n'a pas été actionnée.
Assistance Avant d'appeler le service après-vente: Vérifiez si vous ne pouvez pas résoudre vous-même le problème (voir page 23); Remettez le programme en marche pour contrôler si dysfonctionnement a disparu; Autrement, appelez le Service après-vente de votre revendeur; F Ne vous adressez jamais à des techniciens non agréés. Assistance Communiquez: le type de panne; le modèle de la machine (Référence); le numéro de série (S/N).
Bedienungsanleitungen WASCHVOLLAUTOMAT INHALTSVERZEICHNIS DE Deutsch DE Installation, 26-27 Auspacken und Aufstellen, 26 Wasser- und Elektroanschlüsse, 26-27 Erster Waschgang, 27 Technische Daten, 27 Beschreibung des Waschvollautomaten, 28-29 Schalterblende, 28 Kontrollleuchten, 29 Inbetriebnahme und Programme, 30 Kurz zusammengefasst: Waschprogramm starten, 30 Programmtabelle, 30 Individualisierungen, 31 WIXL 105 Einstellen der Temperatur, 31 Einstellen der Schleuder, 31 Funktionen, 31 Waschmitte
Installation Es ist äußerst wichtig, diese Bedienungsanleitung sorgfältig aufzubewahren, um sie jederzeit zu Rate ziehen zu können. Sorgen Sie dafür, dass sie im Falle eines Umzugs oder Übergabe an einen anderen Benutzer das Gerät stets begleitet, damit auch der neue Inhaber die Möglichkeit hat, diese zu Rate zu ziehen. DE Lesen Sie bitte folgende Hinweise aufmerksam durch, sie liefern wichtige Informationen hinsichtlich der Installation, dem Gebrauch und der Sicherheit.
Anschluss des Ablaufschlauches DE Verwenden Sie bitte keine Verlängerungen oder Mehrfachstecker. Installation 65 - 100 cm Schließen Sie den Ablaufschlauch, ohne ihn dabei zu krümmen, an eine Ablaufleitung, oder an einen in der Wand in einer Mindesthöhe von 65 - 100 cm angelegten Ablauf an; Das Kabel darf nicht gebogen bzw. eingeklemmt werden. Das Versorgungskabel darf nur durch autorisierte Beschreibung Fachkräfte ausgetauscht werden.
Beschreibung des Waschvollautomaten DE Schalterblende Taste FUNKTIONEN Kontrollleuchten Kontrollleuchte ON/FÜLLFENSTER GESPERRT Taste EIN/AUS Wahlschalter Taste Waschmittelschublade PROGRAMME START/RESET Wahlschalter Wahlschalter TEMPERATUR SCHLEUDER Waschmittelschublade: für Waschmittel und Zusätze (siehe Seite 32). Wahlschalter TEMPERATUR: Zur Einstellung der Waschtemperatur oder der Kaltwäsche (siehe Seite 31). Kontrollleuchten: Zur Kontrolle des Waschprogrammablaufs.
Kontrollleuchten Startvorwahl erfolgt: Wurde die Startvorwahl-Funktion Delay Timer (siehe Seite 31) aktiviert, und das Programm in Gang gesetzt, schaltet die Kontrollleuchte, die der eingestellten Zeitverschiebeung entspricht, auf Blinklicht: DE Laufende Programmphase: Während des Waschprogrammablaufs leuchten die Kontrollleuchten nach und nach auf und zeigen so den jeweiligen Stand an. Installation Die Kontrollleuchten liefern wichtige Hinweise.
Inbetriebnahme und Programme Kurz zusammengefasst: Waschprogramm starten DE 1. Schalten Sie den Waschvollautomaten durch Druck auf die Taste ein. Alle Kontrollleuchten leuchten für einige Sekunden auf, und erlöschen kurz darauf wieder. Die Kontrollleuchte ON/FÜLLFENSTER GESPERRT schaltet auf Blinklicht. 2. Wäsche einfüllen und Füllfenster schließen. 3. Stellen Sie das gewünschte Programm mittels des Wahlschalters PROGRAMME ein. 4. Einstellen der Waschtemperatur (siehe Seite 31).
Individualisierungen C Einstellen der Temperatur Durch Drehen des Wahlschalters TEMPERATUR wird die Waschtemperatur eingestellt. (siehe Programmtabelle auf Seite 30). Die Temperatur kann bis auf Kaltwäsche ( ) herabgesetzt werden. DE Installation Einstellen der Schleuder Beschreibung Durch Drehen des Wahlschalters SCHLEUDER wird die Schleudergeschwindigkeit des gewählten Waschprogramms eingestellt.
Waschmittel und Wäsche Waschmittelschublade DE Ein gutes Waschergebnis hängt auch von einer korrekten Waschmitteldosierung ab: Eine zu hohe Dosierung bedeutet nicht unbedingt reinere Wäsche, sie trägt nur dazu bei, die Maschineninnenteile zu verkrusten und die Umwelt zu belasten.
Vorsichtsmaßregeln und Hinweise Allgemeine Sicherheit Dieses Gerät wurde für den nicht professionellen Einsatz im privaten Haushalt konzipiert und seine Funktionen dürfen nicht verändert werden. Ziehen Sie den Gerätestecker nicht am Kabel aus der Steckdose, sondern nur am Stecker selbst. Öffnen Sie die Waschmittelschublade nicht, wenn das Gerät in Betrieb ist. Berühren Sie nicht das Ablaufwasser, es kann sehr heiß sein.
Reinigung und Pflege Wasser- und Stromversorgung abstellen DE Wasserhahn nach jedem Waschvorgang zudrehen. Hierdurch wird der Verschleiß der Wasseranlage verringert und Wasserlecks vorgebeugt. Ziehen Sie den Stecker aus der Steckdose, bevor Sie Ihren Waschvollautomaten reinigen. Reinigung der Pumpe Ihr Gerät ist mit einer selbstreinigenden Pumpe ausgerüstet, eine Wartung ist demnach nicht erforderlich.
Störungen und Abhilfe Es kann immer einmal vorkommen, dass Ihr Waschvollautomat nicht funktioniert. Bevor Sie sich an den Technischen Kundendienst wenden (siehe Seite 36), vergewissern Sie sich zuerst, ob es sich nicht um eine Kleinigkeit handelt, die Sie selbst beheben können. Ziehen Sie hierzu nachstehendes Verzeichnis zu Rate. Mögliche Ursachen / Lösungen: Der Waschvollautomat schaltet sich nicht ein. Der Stecker steckt nicht in der Steckdose, oder nicht so, dass der Kontakt hergestellt wird.
Kundendienst Bevor Sie sich an den Kundendienst wenden: Kontrollieren Sie zuerst, ob das Problem nicht allein gelöst werden kann (siehe Seite 35); Starten Sie das Programm erneut, um sicherzustellen, dass die Störung auch wirklich behoben wurde; Ist dies nicht der Fall, dann kontaktieren Sie den autorisierten Kundendienst unter der auf dem Garantieschein aufgedruckten Telefonnummer. DE Wenden Sie sich auf keinen Fall an nicht autorisierte Techniker.
Instrucciones para el uso LAVADORA Sumario ES Español ES Instalación, 38-39 Desembalaje y nivelación, 38 Conexiones hidráulicas y eléctricas, 38-39 Primer ciclo de lavado, 39 Datos técnicos, 39 Descripción de la lavadora, 40-41 Panel de control, 40 Luces testigo, 41 Puesta en marcha y Programas, 42 En la práctica: poner en marcha un programa, 42 Tabla de programas, 42 Personalizaciones, 43 WIXL 105 Seleccione la temperatura, 43 Seleccionar el centrifugado, 43 Funciones, 43 Detergentes y ropa, 44 C
Instalación ES Es importante conservar este manual para poder consultarlo en cualquier momento. En caso de venta, de cesión o de traslado, verifique que permanezca junto con la lavadora para informar al nuevo propietario sobre el funcionamiento y brindar las correspondientes advertencias. Una cuidadosa nivelación brinda estabilidad a la máquina y evita vibraciones, ruidos y desplazamientos durante el funcionamiento.
Conexión del tubo de descarga El cable de alimentación debe ser sustituido sólo por técnicos autorizados. ¡Atención! La empresa fabricante declina toda responsabilidad en caso de que estas normas no sean respetadas. Primer ciclo de lavado Después de la instalación y antes del uso, realice un ciclo de lavado con detergente y sin ropa, seleccionando el programa a 90ºC sin prelavado. Dimensiones an ch o 59,5 cm. altura 85 cm. profun didad 53,5 cm. Capacidad de 1 a 6 kg.
Descripción de la lavadora Panel de control Botones de ES Luces testigo FUNCIÓN Luz indicadora de ENCENDIDO/PUERTA BLOQUEADA Botón de ENCENDIDO/ APAGADO Mando de Cajón de detergentes Botón de PROGRAMAS START/RESET Mando de CENTRIFUGADO TEMPERATURA Cajón de detergentes: para cargar detergentes y aditivos (véase la pág. 44). Mando de TEMPERATURA: para seleccionar la temperatura o el lavado en frío (ver la pág. 43). Luces testigo: para seguir el estado de avance del programa de lavado.
Luces testigo Retraso seleccionado: Si fue activada la función Delay Timer (ver la pág. 43), después de haber puesto en marcha el programa, comenzará a centellear la luz testigo correspondiente al retraso fijado: ES Fase en curso: Durante el ciclo de lavado, las luces testigo se encenderán progresivamente para indicar su estado de avance. Instalación Las luces testigo suministran información importante.
Puesta en marcha y Programas En la práctica: poner en marcha un programa ES 4. 5. 6. 7. Fije la temperatura de lavado (ver la pág. 43). Fije la velocidad de centrifugado (ver la pág. 43). Vierta el detergente y los aditivos (véase la pág. 44). Ponga en marcha el programa pulsando el botón START/RESET. Para anular, mantenga presionado el botón START/ RESET durante 2 segundos como mínimo. 8.
Personalizaciones C Seleccione la temperatura Girando el mando de la TEMPERATURA se selecciona la temperatura de lavado (ver la Tabla de programas en la pág. 42). La temperatura se puede disminuir hasta el lavado en frío ( ). Instalación Seleccionar el centrifugado Girando el mando de CENTRIFUGADO se selecciona la velocidad de centrifugado del programa seleccionado. Las velocidades máximas previstas para los programas son: Velocidad máxima 1000 r.p.m. 800 r.p.m. 600 r.p.m.
Detergentes y ropa Cajón de detergentes ES El buen resultado del lavado depende también de la correcta dosificación del detergente: si se excede la cantidad, no se lava de manera más eficaz, sino que se contribuye a encostrar las partes internas de la lavadora y a contaminar el ambiente. 4 1 2 3 Extraiga el cajón de detergentes e introduzca el detergente o el aditivo de la siguiente manera: El uso de la cubeta adicional 4 excluye el prelavado.
Precauciones y consejos Seguridad general Este aparato fue fabricado para uso doméstico. No toque la máquina con los pies desnudos ni con las manos o los pies mojados o húmedos. No abra el contenedor de detergentes mientras la máquina está en funcionamiento. En ningún caso fuerce la puerta: podría dañarse el mecanismo de seguridad que la protege de aperturas accidentales. Controle siempre que los niños no se acerquen a la máquina cuando está en funcionamiento.
Mantenimiento y cuidados ES Excluir agua y corriente eléctrica Limpiar la bomba Cierre el grifo de agua después de cada lavado. De este modo se limita el desgaste de la instalación hidráulica de la lavadora y se elimina el peligro de pérdidas. La lavadora posee una bomba autolimpiante que no necesita mantenimiento. Pero puede suceder que objetos pequeños (monedas, botones) caigan en la precámara que protege la bomba, situada en la parte inferior de la misma.
Anomalías y soluciones Puede suceder que la lavadora no funcione. Antes de llamar a la Asistencia Técnica (ver la pág. 48), controle que no se trate de un problema de fácil solución ayudándose con la siguiente lista. ES Posibles causas / Solución: La lavadora no se enciende. El enchufe no está introducido en la toma de corriente, o no hace contacto. En la casa no hay corriente. El ciclo de lavado no comienza. La puerta no está bien cerrada. no fue pulsado.
Asistencia Antes de llamar a la Asistencia Técnica: Verifique si la anomalía la puede resolver solo (ver la pág. 47); Vuelva a poner en marcha el programa para controlar si el inconveniente fue resuelto; Si no es así, llame a la Asistencia técnica autorizada, al número de teléfono indicado en el certificado de garantía. ES No recurra nunca a técnicos no autorizados. Asistencia Comunicar: el tipo de anomalía; el modelo de la máquina (Mod.); el número de serie (S/N ).
Ïäçãßåò ÷ñÞóçò ÐËÕÍÔÇÑÉÏ ÑÏÕ×ÙÍ Ðåñéå÷üìåíá GR ÅËËÇÍÉÊÁ GR ÅãêáôÜóôáóç, 50-51 Áðïóõóêåõáóßá êáé ïñéæïíôßùóç, 50 ÕäñáõëéêÝò êáé çëåêôñéêÝò óõíäÝóåéò, 50-51 Ðñþôïò êýêëïò ðëõóßìáôïò, 51 Ôå÷íéêÜ óôïé÷åßá, 51 ÐåñéãñáöÞ ôïõ ðëõíôçñßïõ, 52-53 Ôáìðëü åëÝã÷ïõ, 52 ÅíäåéêôéêÝò ëõ÷íßåò ëåéôïõñãßáò, 53 Åêêßíçóç êáé ÐñïãñÜììáôá, 54 Åí óõíôïìßá: åêêßíçóç åíüò ðñïãñÜììáôïò, 54 Ðßíáêáò ôùí ðñïãñáììÜôùí, 54 ÐñïóùðéêÝò Ñõèìßóåéò, 55 WIXL 105 ÅðéëÝîôå ôç èåñìïêñáóßá, 55 ÅðéëÝîôå ôçí ôá÷ýôçôá óôõøßìáôïò, 55 Ëåéôïõñãßå
ÅãêáôÜóôáóç GR Åßíáé óçìáíôéêü íá öõëÜîåôå ôï åã÷åéñßäéï áõôü ãéá íá ìðïñåßôå íá ôï óõìâïõëåýåóôå ïðïéáäÞðïôå óôéãìÞ. Óå ðåñßðôùóç ðþëçóçò, ðáñá÷þñçóçò Þ ìåôáêüìéóçò, âåâáéùèåßôå üôé ðáñáìÝíåé ìáæß ìå ôï ðëõíôÞñéï ãéá íá ðëçñïöïñåß ôïí íÝï éäéïêôÞôç ãéá ôç ëåéôïõñãßá êáé ôéò ó÷åôéêÝò ðñïåéäïðïéÞóåéò. Ç óùóôÞ ïñéæïíôßùóç ðñïóäßäåé óôáèåñüôçôá óôï ìç÷Üíçìá êáé áðïóïâåß äïíÞóåéò, èïñýâïõò êáé ìåôáôïðßóåéò êáôÜ ôç ëåéôïõñãßá.
Óýíäåóç ôïõ óùëÞíá áäåéÜóìáôïò íåñïý Ìçí ôóáêßæåôå êáé ìçí ôïðïèåôåßôå âáñéÜ áíôéêåßìåíá ðÜíù óôï êáëþäéï ôñïöïäïóßáò. Ôï êáëþäéï ôñïöïäïóßáò ðñÝðåé íá áíôéêáèßóôáôáé ìüíï áðü åîïõóéïäïôçìÝíïõò ôå÷íéêïýò. ÐåñéãñáöÞ Ðñïóï÷Þ! Ç åðé÷åßñçóç áðïðïéåßôáé êÜèå åõèýíçò óå ðåñßðôùóç ðïõ ïé êáíüíåò áõôïß äåí ôçñïýíôáé. Ðñþôïò êýêëïò ðëõóßìáôïò ÐñïãñÜììáôá Ìðïñåßôå åðßóçò íá óôçñßîåôå ôïí óùëÞíá áäåéÜóìáôïò íåñïý óôï ÷åßëïò åíüò íéðôÞñá äÝíïíôÜò ôïí óôçí âñýóç (âëÝðå åéêüíá).
ÐåñéãñáöÞ ôïõ ðëõíôçñßïõ Ôáìðëü åëÝã÷ïõ GR ÐëÞêôñá ÅíäåéêôéêÝò ëõ÷íßåò ëåéôïõñãßáò ËÅÉÔÏÕÑÃÉÁÓ ÅíäåéêôéêÞ ëõ÷íßá ÅÍÅÑÃÏÐÏÉÇÓÇ/ÐÏÑÔÁ ÁÓÖÁËÉÓÌÅÍÇ ÐëÞêôñï ÁÍÁÌÌÁÔÏÓ/ ÓÂÇÓÉÌÁÔÏÓ ÐëÞêôñï ðéëïãÞò ÐÑÏÃÑÁÌÌÁÔÙÍ ÈÞêç áðïññõðáíôéêþí ÐëÞêôñï START/RESET ÐëÞêôñï ðéëïãÞò ÐëÞêôñï ðéëïãÞò ÈÅÑÌÏÊÑÁÓÉÁÓ ÓÔÕØÉÌÁÔÏÓ ÈÞêç áðïññõðáíôéêþí: ãéá ôçí ðñïóèÞêç áðïññõðáíôéêþí êáé ðñüóèåôùí (âëÝðå óåë. 56). ÅíäåéêôéêÝò ëõ÷íßåò: ãéá íá ðáñáêïëïõèåßôå ôçí ðñüïäï ôïõ ðñïãñÜììáôïò ðëýóçò.
ÅíäåéêôéêÝò ëõ÷íßåò ëåéôïõñãßáò Ðñïãñáììáôéóìüò ðëýóçò: Áí Ý÷åé åíåñãïðïéçèåß ç ëåéôïõñãßá Delay Timer (âëÝðå óåë. 55), áöïý îåêéíÞóåé ôïõ ðñüãñáììá, èá áñ÷ßóåé íá áíáâïóâÞíåé ôï åíäåéêôéêü öùôÜêé ôï ó÷åôéêü ìå ôçí ôåèåßóá êáèõóôÝñçóç: ÖÜóç óå åîÝëéîç: ÊáôÜ ôïí êýêëï ðëõóßìáôïò ïé åíäåéêôéêÝò ëõ÷íßåò èá áíÜøïõí ðñïïäåõôéêÜ ãéá íá äåßîïõí ôçí ðñüïäï ôçò ðëýóçò: Ðñüðëõóç Ðëýóéìï ÐåñéãñáöÞ ÎÝâãáëìá Óôýøéìï ÐëÞêôñá ëåéôïõñãßáò ÔÁ ÐËÇÊÔÑÁ ËÅÉÔÏÕÑÃÉÁÓ ÷ñçóéìåýïõí åðßóçò êáé óáí åíäåéêôéêÝò ëõ÷íßåò.
Åêêßíçóç êáé ÐñïãñÜììáôá Åí óõíôïìßá: åêêßíçóç åíüò ðñïãñÜììáôïò GR 5. ÅðéëÝîôå ôçí ôá÷ýôçôá óôõøßìáôïò (âëÝðå óåë. 55). 6. ÔïðïèåôÞóôå ôï áðïññõðáíôéêü êáé ôõ÷üí ðñüóèåôá (âëÝðå óåë. 56). 7. ÅêêéíÞóôå ôï ðñüãñáììá ðéÝæïíôáò ôï êïõìðß START/ RESET. Ãéá ôçí áêýñùóç êñáôÞóôå ðáôçìÝíï ôï êïõìðß START/ RESET ãéá ôïõëÜ÷éóôïí 2 äåõôåñüëåðôá. 8. Óôï ôÝëïò ôïõ ðñïãñÜììáôïò ç åíäåéêôéêÞ ëõ÷íßá ÅÍÅÑÃÏÐÏÉÇÓÇ/ÐÏÑÔÁ ÁÓÖÁËÉÓÌÅÍÇ áíáâïóâÞíåé õðïäåéêíýïíôáò üôé ç ðüñôá ìðïñåß íá áíïßîåé.
ÐñïóùðéêÝò Ñõèìßóåéò C ÅðéëÝîôå ôç èåñìïêñáóßá ÅðéëÝîôå ôçí ôá÷ýôçôá óôõøßìáôïò ÓôñÝöïíôáò ôï ðëÞêôñï åðéëïãÞò ÓÔÕØÉÌÏ ìðïñåßôå íá åðéëÝîåôå ôçí ôá÷ýôçôá óôõøßìáôïò ôïõ åðéëåãìÝíïõ ðñïãñÜììáôïò. Ïé ìÝãéóôåò ðñïâëåðüìåíåò ôá÷ýôçôåò ãéá ôá ðñïãñÜììáôá åßíáé: ÌÝãéóôç ôá÷ýôçôá 1000 óôñïöÝò áíÜ ëåðôü 800 óôñïöÝò áíÜ ëåðôü 600 óôñïöÝò áíÜ ëåðôü ü÷é ÐåñéãñáöÞ ÐñïãñÜììáôá ÂáìâáêåñÜ ÓõíèåôéêÜ ÌÜëëéíá ÌåôáîùôÜ ÐñïãñÜììáôá .
ÁðïññõðáíôéêÜ êáé ñïý÷á ÈÞêç áðïññõðáíôéêþí GR Ôï êáëü áðïôÝëåóìá ôïõ ðëõóßìáôïò åîáñôÜôáé åðßóçò êáé áðü ôç óùóôÞ äïóïëïãßá ôïõ áðïññõðáíôéêïý: õðåñâÜëëïíôáò äåí ðëÝíïõìå áðïôåëåóìáôéêüôåñá êáé åðéðëÝïí óõíôåëïýìå óôç äçìéïõñãßá êñïýóôáò óôá åóùôåñéêÜ ìÝñç ôïõ ðëõíôçñßïõ êáé óôç ìüëõíóç ôïõ ðåñéâÜëëïíôïò. 4 1 2 3 ÂãÜëôå ôç èÞêç áðïññõðáíôéêþí êáé åéóÜãåôå ôï áðïññõðáíôéêü Þ ôï ðñüóèåôï ùò åîÞò.
ÐñïöõëÜîåéò êáé óõìâïõëÝò ÃåíéêÞ áóöÜëåéá Ç óõóêåõÞ áõôÞ ó÷åäéÜóôçêå ãéá ïéêéáêÞ ÷ñÞóç, ìç åðáããåëìáôéêÞ êáé ïé ëåéôïõñãßåò ôçò äåí ðñÝðåé íá áëëïéùèïýí. Ìçí áããßæåôå ôï ìç÷Üíçìá ìå ãõìíÜ ðüäéá Þ ìå ôá ÷Ýñéá Þ ôá ðüäéá âñåãìÝíá. Ìçí âãÜæåôå ôï âýóìá áðü ôçí çëåêôñéêÞ ðñßæá ôñáâþíôáò ôï êáëþäéï, áëëÜ íá ðéÜíåôå ôçí ðñßæá. Ìçí áããßæåôå ôï íåñü áäåéÜóìáôïò, áöïý ìðïñåß íá öôÜóåé óå õøçëÝò èåñìïêñáóßåò. Íá åëÝã÷åôå ðÜíôá ôá ðáéäéÜ íá ìçí ðëçóéÜæïõí óôï ìç÷Üíçìá üôáí áõôü ëåéôïõñãåß.
ÓõíôÞñçóç êáé öñïíôßäá Êëåßóéìï ðáñï÷þí íåñïý êáé çëåêôñéêïý ñåýìáôïò GR Êáèáñéóìüò ôçò áíôëßáò Êëåßíåôå ôçí âñýóç ìåôÜ áðü êÜèå ðëýóéìï. ¸ôóé ðåñéïñßæåôáé ç öèïñÜ ôçò õäñáõëéêÞò åãêáôÜóôáóçò ôïõ ðëõíôçñßïõ êáé áðïóïâåßôáé ï êßíäõíïò áðùëåéþí. Ôï ðëõíôÞñéï äéáèÝôåé ìéá áíôëßá áõôïêáèáñéæüìåíç ðïõ äåí ÷ñåéÜæåôáé óõíôÞñçóç. Ìðïñåß üìùò íá ôý÷åé íá ðÝóïõí ìéêñÜ áíôéêåßìåíá (êÝñìáôá, êïõìðéÜ) óôïí ðñïèÜëáìï ðïõ ðñïóôáôåýåé ôçí áíôëßá, ðïõ âñßóêåôáé óôï êÜôù ìÝñïò áõôÞò.
ÐñïâëÞìáôá êáé ëýóåéò Ìðïñåß íá óõìâåß ôï ðëõíôÞñéï íá ìç ëåéôïõñãåß. Ðñéí ôçëåöùíÞóåôå óôçí ÕðïóôÞñéîç (âëÝðå óåë. 60), åëÝãîôå áí äåí ðñüêåéôáé ãéá Ýíá ðñüâëçìá ðïõ åðéëýåôáé åýêïëá ìå ôç âïÞèåéá ôïõ áêüëïõèïõ êáôáëüãïõ. Ï óùëÞíáò ôñïöïäïóßáò ôïõ íåñïý äåí åßíáé óõíäåäåìÝíïò óôïí êñïõíü. Ï óùëÞíáò åßíáé äéðëùìÝíïò. ç âñýóç äåí åßíáé áíïéêôÞ. Óôï óðßôé ëåßðåé ôï íåñü. Äåí õðÜñ÷åé áñêåôÞ ðßåóç. Ôï êïõìðß START/RESET äåí ðáôÞèçêå. Ôï ðëõíôÞñéï öïñôþíåé êáé áäåéÜæåé íåñü óõíå÷þò.
Ôå÷íéêÞ ÕðïóôÞñéîç Ðñéí êáëÝóåôå ôçí ôå÷íéêÞ õðïóôÞñéîç: Âåâáéùèåßôå üôé äåí ìðïñåßôå íá åðéëýóåôå ìüíïé óáò ôï ðñüâëçìá (âëÝðå óåë. 59) ÅðáíåêêéíÞóôå ôï ðñüãñáììá ãéá íá åëÝãîåôå áí ôï ðñüâëçìá áíôéìåôùðßóôçêå Óå áíôßèåôç ðåñßðôùóç, åðéêïéíùíÞóôå ìå ôï åîïõóéïäïôçìÝíï ôìÞìá ôå÷íéêÞò õðïóôÞñéîçò ðïõ áíáãñÜöåôáé óôï ðéóôïðïéçôéêü åããýçóçò. GR Ìçí êáôáöåýãåôå ðïôÝ óå ìç åîïõóéïäïôçìÝíïõò ôå÷íéêïýò. ÕðïóôÞñéîç ÃíùóôïðïéÞóôå: ôï åßäïò ôïõ ðñïâëÞìáôïò ôï ìïíôÝëï ôïõ ìç÷áíÞìáôïò (Mod.
Használati utasítás MOSÓGÉP Összefoglalás HU Magyar HU Üzembehelyezés, 62-63 Kicsomagolás és vízszintbe állítás, 62 Víz és elektromos csatlakozás, 62-63 Elsõ mosási ciklus, 63 Mûszaki adatok, 63 Mosógép leírása, 64-65 Vezérlõpanel, 64 Visszajelzõ lámpák, 65 Indítás és Programok, 66 Röviden: egy program elindítása, 66 Programtáblázat, 66 Program módosítások, 67 WIXL 105 Hõmérséklet beállítása, 67 Centrifugálás beállítása, 67 Funkciók, 67 Mosószerek és mosandók, 68 Mosószeradagoló fiók, 68 Fehérítõ
Üzembehelyezés E kézikönyv megõrzése azért fontos, hogy bármikor HU elõvehesse, és megnézhesse. Ha a mosógépet eladná, átadná vagy másnál helyezné el, gondoskodjon arról, hogy e használati utasítás a géppel együtt maradjon, hogy az új tulajdonos is megismerhesse a mosógép funkcióit és az ezekre vonatkozó figyelmeztetéseket. Figyelmesen olvassa el az utasításokat: fontos információkat tartalmaznak az üzembehelyezésrõl, a használatról és a biztonságról.
A leeresztõcsõ csatlakoztatása HU Ne használjon hosszabbítót vagy elosztót. Üzembehelyezés 65 - 100 cm A leeresztõcsövet csatlakoztassa lefolyóhoz vagy a padlótól 65 és 100 cm közötti magasságban lévõ fali lefolyószifonhoz anélkül, hogy megtörné, Ne legyen a kábel megtörve vagy összenyomva. A hálózati kábelt csak megbízott szakember cserélheti.
A mosógép leírása Vezérlõpanel HU Visszajelzõ lámpák FUNKCIÓ billentyûk BEKAPCSOLÁS/ KIKAPCSOLÁS billentyû PROGRAM beállító tárcsa Mosószeradagoló fiók START/RESET billentyû CENTRIFUGÁLÁS beállító tárcsa HÕMÉRSÉKLET beállító tárcsa Mosószeradagoló fiók a mosószerek és adalékszerek betöltésére (lásd 68. oldal). START/RESET: billentyû a program elindítására vagy a hibás beállítás törlésére. Visszajelzõ lámpák: a mosóprogram állapotának követésére.
Visszajelzõ lámpák Beállított késleltetés: Hogy a Késleltetõ Idõzítõ funkció be van-e kapcsolva (lásd 67. oldal): a program elindítása után a kiválasztott késleltetéshez tartozó visszajelzõ elkezd villogni: HU Folyamatban lévõ mosási fázis: A mosás során a visszajelzõk egymás után gyulladnak meg, ezzel jelezve a program elõrehaladását: Üzembehelyezés A visszajelzõ lámpák fontos információkkal szolgálnak.
Indítás és Programok Röviden: egy program elindítása 5. Állítsa be a centrifugálási fordulatszámot (lásd 67. oldal). 6. Töltse be a mosószert és az adalékokat (lásd 68. oldal). 7. A START/RESET billentyû megnyomásával indítsa el a programot. A törléshez tartsa nyomva a START/RESET billentyût legalább 2 másodpercen keresztül. 8. A program végeztével a BEKAPCSOLVA/AJTÓZÁR visszajelzõ villog, azt jelezve, hogy az ajtót ki lehet nyitni.
Program módosítások C Hõmérséklet beállítása A mosási hõmérsékletet a HÕMÉRSÉKLET tárcsa elforgatásával lehet beállítani (lásd a Programtáblázatot a 66. oldalon). A hõmérsékletet a hideg vízzel történõ mosásig lehet csökkenteni ( ). HU Üzembehelyezés Centrifugálás beállítása Leírás A kiválasztott programhoz a centrifugálás fordulatszámát a CENTRIFUGA tárcsa elforgatásával lehet beállítani.
Mosószerek és mosandók Mosószeradagoló fiók HU A mosás eredményessége függ a mosószer helyes adagolásától is: ha túl sokat adagol belõle, a mosás nem lesz hatékonyabb, de hozzájárul ahhoz, hogy lerakódás képzõdjön a mosógépben, valamint a környezetet is jobban szennyezi. 4 1 2 3 Húzza ki a mosószeradagoló fiókot, és a következõképpen tegye bele a mosószret vagy az adalékot.
Óvintézkedések és tanácsok A mosógépet a nemzetközi biztonsági Általános biztonság Ne érjen a géphez mezítláb, illetve vizes vagy nedves kézzel vagy lábbal. Ne nyissa ki a mosószeradagoló fiókot, ha a mosógép mûködik. Ne nyúljon a leeresztett vízbe, mert forró lehet. Mindig ügyeljen arra, hogy gyerekek ne mehessenek a mûködõ gép közelébe. A mosás során az ajtó meleg lehet. A mosandó berakása elõtt ellenõrizze, hogy a forgódob üres legyen.
Karbantartás és törõdés A víz elzárása és az elektromos áram kikapcsolása HU Minden mosás után zárja el a vízcsapot. Így kíméli a mosógép vízrendszerét, és megszünteti a vízszivárgás kockázatát. Húzza ki a hálózati csatlakozódugót az aljzatból, amikor a mosógépet tisztítja vagy karbantartást végez. A mosógép tisztítása A külsõ részeket és a gumi részeket langyos szappanos vizes ronggyal tisztíthatja. Ne használjon oldószert vagy súrolószert.
Rendellenességek és elhárírásuk Megtörténhet, hogy a mosógép nem mûködik. Mielõtt felhívná a Szervizt (lásd 72. oldal) ellenõrizze, hogy nem olyan problémáról van szó, amely a következõ lista segítségével egyszerûen megoldható. A vízbevezetõ csõ nincs csatlakoztatva a csaphoz. A csõ meg van törve. A vízcsap nincs nyitva. A lakásban nincs víz. Nincs elegendõ nyomás. Nem nyomta meg a START/RESET billentyût. A mosógép folytonosan szívja és lereszti a vizet.
Szerviz 195057726.00 04/2006 - Xerox Business Services Mielõtt a Szervizhez fordulna: Gyõzõdjön meg arról, hogy a hibát nem tudja maga is elhárítani (lásd 71. oldal); Újból indítsa el a programot, hogy lássa, elhárította-e a hibát; Ellenkezõ esetben forduljon a megbízott Szakszervizhez: a telefonszámot a garanciajegyen találja. HU Soha ne forduljon nem megbízott szerelõhöz. Szerviz Közölje: a meghibásodás jellegét; a mosógép modelljét (Mod.); a gyártási számot (Sorsz.).