Instruction for Use

A. Control panel
B. Freezer Compartment
1. Ice tray
2. Plastic shelves
3. Area for freezing (with/without flap)
4. Area for storing frozen foods
5. The freezer door tray for pizza or other frozen
products with a short storage time (2** storage
compartment)
6. Door seals
C. Refrigerator Compartment
7. Lighting
8. Filter in fan
8a. button of fan
8b. cover of fan
9. Shelves / Shelf area
10. Multi-flow cold air system
11. Cooler compartment (best for meat and fish)
12. Rating plate with commercial name
13. Fruits and vegetables crisper
13a. Crisper divider
14. Reversibility kit
15. Separator
16. Door trays
Anti-bacterial protection (depending on the model):
- Antibacterial filter in the fan (8)
- Antibacterial additives in the Crisper (13)
- Door seals are made of material able to inhibit bacterial
growth (6).
Notes:
- Depending on the model the number and type of
accessories may vary.
- In case it'll have a freezer flap, please remember that to
maximize the storage volume it's suggested to remove
flap by bending it.
- All shelves and door trays are removable.
- The internal temperatures of the appliance depend on
the ambient temperature, frequency of opening the
doors, as well as location of the appliance. Temperature
setting must consider these factors.
- The appliance accessories are not suitable for washing in
dishwasher.
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically.
After starting the appliance, wait at least 4-6 hours before
placing food into the appliance.
Particular control elements are activated:
• The indicator LEDs on the control panels light up for 2
seconds.
• Activation of a beep for 1 second.
Note:
• If food is placed in the refrigerator before the appliance
has cooled completely, it may deteriorate.
CONTROL PANEL
(1) Cavity selection "Fridge / Freezer" pushbutton
(2) Green LED ON/OFF informing of:
- freezer cabinet temp. setting (green LED light ON)
- fridge cabinet temp. setting - (green LED light OFF)
(3) Temperature selection button "Temp.".
(4) (5) (6) Green LEDs indicating temperature settings.
(7) "Stop alarm" pushbutton.
TEMPERATURES ADJUSTMENT
Temperature adjustment between cabinets is made with
the "Fridge / Freezer" button (1).
When the LED (2) is OFF the user can select
temperature in the fridge.
When the LED (2) is ON the user can select temperature
in the freezer.
The temperature in the refrigerator and freezer
compartment may be set by the temperature setting
pushbutton (3) on the control panel.
On the left there are described the 5 set points for the
refrigerator and freezer compartment.At each short
pressure of the "Temp." button (3), the setpoint will
change (cyclically).
Legend: LED OFF LED ON
The medium temp. is the recommended temperature
settings.
PRODUCT SHEET
GB
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
UKR CAROBGRUSHSKCZPLFINDKNSGRIPENLFGBD