Instructions for use WASHING MACHINE Contents GB English,1 ES Español,13 GB Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washing machine, 4-5 Control panel Display Running a wash cycle, 6 Wash cycles and options, 7 Table of programmes and wash cycles Wash option Detergents and laundry, 8 Detergent dispenser drawer Preparing the laundry Special wash cycles WMF 722 Precautions and advice, 9 General safety
Installation GB ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. ! Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. Unpacking and levelling Unpacking 1.
! The cable should not be bent or compressed. Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a drain duct or a wall drain situated between 65 and 100 cm from the floor; GB ! The power supply cable must only be replaced by authorised technicians. Warning! The company shall not be held responsible in the event that these standards are not observed.
Description of the washing machine GB Control panel TEMPERATURE CHILD LOCK button button ON/OFF CLEANING ACTION button button DISPLAY Detergent dispenser drawer WASH CYCLE SELECTOR KNOB SPIN button OPTION button and indicator light START/PAUSE button and indicator light DELAY TIMER button Detergent dispenser drawer: used to dispense detergents and washing additives ( see “Detergents and laundry”).
Display GB The display is useful when programming the machine and provides a great deal of information. The duration of the available wash cycles and the remaining time of a running cycle appear; if the DELAY TIMER option has been set, the countdown to the start of the selected wash cycle will appear.
Running a wash cycle GB 1. SWITCH THE MACHINE ON. Press the button; the START/PAUSE indicator light will flash slowly in a green colour. 2. LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure you do not exceed the maximum load value indicated in the table of programmes and wash cycles on the following page. 3. MEASURE OUT THE DETERGENT. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “Detergents and laundry”. 4.
Wash cycles and options Wash cycles Table of programmes and wash cycles Description of the wash cycle GB Max. temp. (°C) Max. speed (rpm) Detergents Prewash Wash Bleach Fabric softener Max. Cycle load duration (kg) Anti Stain 40° 1200 - - Whites 60° 1200 - - 3 Cotton + Prewash: extremely soiled whites. 90° 1200 - 4 Cotton (1): heavily soiled whites and resistant colours. 60° 1200 - 5 Cotton (2-3): lightly soiled resistant colours.
Detergents and laundry GB Detergent dispenser drawer Special wash cycles Successful washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. Anti Stain: the programme 1 is suitable to heavily-soiled garments with resistant colours. It ensures a washing class that is higher than the standard class (A class).
Precautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. Opening the porthole door manually General safety • This appliance was designed for domestic use only.
Care and maintenance GB Cutting off the water and electricity supplies Caring for the door and drum of your appliance • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. • Always leave the porthole door ajar in order to prevent unpleasant odours from forming. • Unplug the washing machine when cleaning it and during all maintenance work.
Troubleshooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be not solved easily using the following list. Problem: Possible causes / Solutions: The washing machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. GB • There is no power in the house. The wash cycle does not start.
Service GB Before contacting the Technical Assistance Service: • Check whether you can solve the problem alone (see “Troubleshooting”). • Restart the wash cycle to check whether the problem has been solved. • If this is not the case, contact an authorised Technical Assistance Centre. ! Always request the assistance of authorised technicians. Have the following information to hand: • the type of problem; • the appliance model (Mod.); • the serial number (S/N).
Manual de instrucciones LAVADORA Sumario ES Instalación, 14-15 ES Español Desembalaje y nivelación Conexiones hidráulicas y eléctricas Primer ciclo de lavado Datos técnicos Descripción de la lavadora, 16-17 Panel de control Pantalla Cómo efectuar un ciclo de lavado, 18 Programas y opciones, 19 Tabla de programas Opción de lavado WMF 722 Detergentes y ropa, 20 Contenedor de detergentes Preparar la ropa Programas particulares Precauciones y consejos, 21 Seguridad general Eliminación Apertura manual de
Instalación ES ! Es importante conservar este manual para poder consultarlo en cualquier momento. En caso de venta, de cesión o de traslado, verifique que permanezca junto con la lavadora para informar al nuevo propietario sobre el funcionamiento y brindar las correspondientes advertencias. Una cuidadosa nivelación brinda estabilidad a la máquina y evita vibraciones, ruidos y desplazamientos durante el funcionamiento.
Conexión del tubo de desagüe 65 - 100 cm Conecte el tubo de desagüe, sin plegarlo, a un conducto de desagüe o a una desagüe de pared ubicados a una distancia del piso comprendida entre 65 y 100 cm.; ! El cable no debe estar plegado ni sufrir compresiones. ES ! El cable de alimentación debe ser sustituido sólo por técnicos autorizados. ¡Atención! La empresa fabricante declina toda responsabilidad en caso de que estas normas no sean respetadas.
Descripción de la lavadora ES Botón Panel de control Botón ON/OFF BLOQUEO DE BOTONES Botón TEMPERATURA Botón ACCIÓN DE LIMPIEZA PANTALLA Cajón de detergentes MANDO DE PROGRAMAS Botón y piloto Botón CENTRIFUGADO Botón START/PAUSE Botones y pilotos OPCIÓN COMIENZO RETRASADO Cajón de detergentes: para cargar detergentes y aditivos (ver “Detergentes y ropa”). Botón ON/OFF : presione brevemente el botón para encender o apagar la máquina.
Pantalla ES La pantalla es útil para programar la máquina y ofrece múltiple información. Se visualiza la duración de los diferentes programas a disposición y una vez que comienza el ciclo, el tiempo residual hasta la finalización; si se hubiera seleccionado un COMIENZO RETRASADO, se visualiza el tiempo que falta para que comience el programa seleccionado.
Cómo efectuar un ciclo de lavado ES 1. ENCENDER LA MÁQUINA. Presione el botón ; el piloto START/PAUSE centelleará lentamente de color verde. 2. CARGAR LA ROPA. Abra la puerta. Cargue la ropa, cuidando no superar la cantidad de carga indicada en la tabla de programas de la página siguiente. 3. DOSIFICAR EL DETERGENTE. Extraiga el cajón y vierta el detergente en las cubetas correspondientes como se explica en “Detergentes y ropa”. 4. CERRAR LA PUERTA. 5. ELEGIR EL PROGRAMA.
Programas y opciones Programas Tabla de programas Antimancha Blancos Prelavado Algodón: blancos extremadamente sucios. Algodón (1): blancos y colores resistentes muy sucios. Algodón Color (2-3): blancos y colores delicados poco sucios. Sintético Resistente: colores resistentes muy sucios. Sintético Resistente (4): colores resistentes muy sucios. Antialérgico Baby Lana: para lana, cachemira, etc.
Detergentes y ropa ES Contenedor de detergentes Programas particulares El buen resultado del lavado depende también de la correcta dosificación del detergente: si se excede la cantidad, no se lava de manera más eficaz, sino que se contribuye a encostrar las partes internas de la lavadora y a contaminar el medio ambiente. Antimancha: el programa 1 es adecuado para el lavado de prendas muy sucias, con colores resistentes. El programa garantiza una clase de lavado superior a la clase estándar (clase A).
Precauciones y consejos ! La lavadora fue proyectada y fabricada en conformidad con las normas internacionales de seguridad. Estas advertencias se suministran por razones de seguridad y deben ser leídas atentamente. Seguridad general • Este aparato ha sido fabricado para un uso de tipo doméstico exclusivamente.
Mantenimiento y cuidados ES Interrumpir el agua y la corriente eléctrica Limpiar la bomba • Cierre el grifo de agua después de cada lavado. De este modo se limita el desgaste de la instalación hidráulica de la lavadora y se elimina el peligro de pérdidas. • Desenchufe la máquina cuando la debe limpiar y durante los trabajos de mantenimiento. La lavadora posee una bomba autolimpiante que no necesita mantenimiento.
Anomalías y soluciones Puede suceder que la lavadora no funcione. Antes de llamar al Servicio de Asistencia Técnica (ver “Asistencia Técnica”),controle que no se trate de un problema de fácil solución utilizando la siguiente lista. ES Anomalías: Posibles causas / Solución: La lavadora no se enciende. • El enchufe no está introducido en la toma de corriente, o no hace contacto. • En la casa no hay corriente. El ciclo de lavado no comienza. • • • • • La puerta no está correctamente cerrada.
Asistencia Técnica 195095304.00 07/2011 - Xerox Fabriano ES Antes de llamar al Servicio de Asistencia Técnica: • Verifique si la anomalía la puede resolver Ud. solo (ver “Anomalías y soluciones”); • Vuelva a poner en marcha el programa para controlar si el inconveniente fue resuelto; • Si no es así, llame a un Centro de Asistencia Técnica. ! No recurra nunca a técnicos no autorizados. Comunique: • el tipo de anomalía; • el modelo de la máquina (Mod.); • el número de serie (S/N ).