Dimension Guide
DIMENSIONS
5 of 10
IMPORTANT: Dimensional specications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Whirlpool
®
appliances are appropriately UL, CUL or CSA approved.
MODEL #
SLIM TRIM KIT MODELS
WMT50011K / KMBT5011K
STANDARD TRIM KIT MODELS
WMT55511K / KMBT5511K
Unit of Measurement in cm in cm
Width of cabinet opening (min.)* (A) 30 76.2 30 76.2
Width of cutout (B) 28
1
/
2
72.4 28
1
/
2
72.4
Height of cutout (C) 12 30.5 17
1
/
8
43.5
Top of cutout to bottom of upper cabinet door (min.) (D) 2 5.1 2 5.1
Bottom of cutout to top of lower cabinet door (min.) (E) 1
9
/
16
4 1
9
/
16
4
Depth of cutout (min.) (F) 21
3
/
4
55.2 21
3
/
4
55.2
Bottom of cutout to oor (min.) (G) 36 91.4 36 91.4
Back of the microwave oven to the surface of junction
box (H)
4" (10.2 cm) < H < 40" (102 cm)
Recommended junction box location (e) Upper right quadrant
Can this product be installed ush? Flush refers to the
appliance not protruding past the cabinet depth. (Y/N)
(J)
N
ELECTRICAL REQUIREMENTS
120 V, 60 Hz, AC only, 15 or 20 A fused, electrical supply is
required. A time-delay fuse or dedicated circuit is recommended.
Use a grounded 3 prong outlet. Do not use an extension cord.
LOCATION REQUIREMENTS
n This is a built-in appliance. Do not use as countertop
microwave oven.
n Minimum of 36" from the oor to cut-out oor.
n Complete enclosure around the recessed portion of the
microwave oven.
n This microwave oven must be installed into a wood cabinetry.
The location must provide:
1. Cutout opening that is plumb and square.
2. Cutout oor that is solid, level and ush with bottom of
cabinet cutout.
3. Support for weight of at least 150 lbs (68 kg), which
includes microwave oven and items placed inside.
A
D
B
C*
E
e
G
Power Supply
Location
F
e
H
FRONT VIEW SIDE VIEW BACK VIEW
OPENING/CLEARANCE DIMENSIONS
W11436613A