Installation Guide

1. Connect the two black wires (C) together using a UL Listed

wire connector.

2. Connect the two white wires (D) and the green (or bare)

ground wire (of the oven cable) using a UL Listed wire

connector.

3. Connect the two red wires (G) together using a UL Listed

wire connector.

4. Install junction box cover.

Install Oven

1. Using two or more people, lift the oven partially into cabinet

cutout. Use the oven opening as an area to grip.

NOTE: Push against seal area of oven front frame when

pushing oven into cabinet. Do not push against the outside

edges.

2. Push against the seal area of the front frame to push the

oven into the cabinet until the back surface of the front frame

touches the front wall of the cabinet.

3. Push the oven completely into the cabinet and center oven

into cabinet cutout.

4. Remove the tape from the black front trim, and remove the

zip tie from the mounting spacer.

■ Securely fasten the oven to the cabinet using the

#8-14 x 1" screws provided.

■ Insert the screws through holes in black trim, aligning

with the holes in oven frame and mounting spacers

already in place. Do not overtighten screws.

A. Oven frame

B. Mounting spacer

C. Oven frame hole

D. Black trim piece