Service Guide

COMPONENT ACCESS
Whirlpool
®
Smart Wall Ovens

4-13
Oven - Accessing the Cooking Components
1. Remove the all ¼" (6.4 mm) hex-head screws from the rear
2. Remove rear panels and set aside. You now have access to
the following components (may vary by model):
•
• Light assembly
• Thermal Limiter
• Oven temp sensor
• Light assembly (right side light)
• Cooling Fan
• Broil element
• Bake element
•
•
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
E
H
A
J
F G
D
B
C
I
A. Conv Fan
B. Light assembly
C. Thermal limiter
D. Oven temp sensor
E. Light assembly (right side light)
F. Cooling Fan
E. Broil element
H. Bake element
I. Hall E ect Sensor
J. Conv nt
Back to Table of Contents
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.