Installation Instructions

10
4. Reinstall the foot to the spacer using the #8-18 x 3/8"
(9.5 mm) screw previously removed.
5. In the same manner, remove, rotate, and reinstall the
feet on the right rear, left front, and left rear of the oven.
6. Using two or more people, place the oven in its upright
position.
7. Go to the “Make Electrical Connection” section.
Double Ovens
The positioning of the oven feet allow a double oven to be
installed in a cutout height between 48
7
/
8
" and 52
3
/
16
" (124.1 cm
and 132.6 cm). Refer to the following instructions to position
the feet for the size of your cabinet cutout.
Cutout Height Is Between 48
7
/
8
" and 50
7
/
16
"
(124.1 cm and 128.1 cm)
The oven feet do not need to be installed. The oven
is configured correctly as received.
NOTE: Do not remove the spacers.
Go to the “Make Electrical Connection” section.
A
A
A. Spacers