Installation Instructions

12
Cutout Height Is Between 51
3
/
16
" and 52
3
/
16
"
(130 cm and 132.6 cm)
1. Using two or more people, place the oven on its back
on a covered surface.
2. Install a foot on the left rear spacer using a #8-18 x 3/8"
(9.5 mm) screw.
NOTE: Position the foot so the short side of the foot is facing
toward the top of the oven.
3. In the same manner, install a foot on the right rear of the oven.
4. Install a front foot on the left front using a #8-18 x 3/8"
(9.5 mm) screw.
NOTE: Position the foot so the long side of the foot is facing
toward the top of the oven.
5. In the same manner, install a front foot on the right front
of the oven.
6. Using two or more people, place the oven in its upright
position.
7. Go to the “Make Electrical Connection” section.
C
B
A
A. Spacer
B. Foot
C. #8-18 x 3/8" (9.5 mm) screw
A
B
C
A. Front foot
B. #8-18 x 3/8" (9.5 mm) screw
C. Spacer