Specification
Table Of Contents
- BUILT-IN OVEN SAFETY
- Built-In Oven Safety
- OVEN MAINTENANCE AND CARE
- General Cleaning
- Self-Cleaning Cycle
- Steam Clean
- INSTALLATION INSTRUCTIONS
- REQUIREMENTS
- Tools and Parts
- Location Requirements
- Electrical Requirements
- INSTALLATIONS
- Prepare Built-In Oven
- Remove Oven Door(s)
- Positioning Oven Feet for Multiple Cabinet Cutout Heights
- Make Electrical Connection
- Install Oven
- Install Warming Drawer Deflector Kit (Only for Ovens Installed Above Warming Drawers)
- Replace Oven Door(s)
- Complete Installation
- SECURITE DU FOUR ENCASTRE
- Securite du four encastre
- ENTRETIEN ET REPARATION DU FOUR
- Nettoyage general
- Programme d'autonettoyage
- Nettoyage a la vapeur
- INSTRUCTIONS D'INSTALLATION
- SPECIFICATIONS
- Outils et pieces
- Exigences d'emplacement
- Specifications electriques
- INSTALLATION
- Preparer le four encastre
- Enlever la/les porte(s) du four
- Positionner les pieds du four pour des ouvertures de decoupe dans l'armoire
- Raccordement electrique
- Installation du four
- Installer l'ensemble de deflecteurs pour tiroir-rechaud (uniquement pour les fours installes par-dessus des tiroirs-rechauds)
- Reinstallation de la/des porte(s) du four
- Achever l'installation
- SEGURIDAD DEL HORNO INTEGRADO
- Seguridad del horno integrado
- MANTENIMIENTO Y CUIDADO DEL HORNO
- General Cleaning
- Ciclo de autolimpieza
- Steam Clean
- INSTRUCCIONES DE INSTALACION
- REQUISITOS
- Tools and Parts
- Location Requirements
- Requisitos electricos
- INSTALACIONES
- Preparacion del horno empotrado
- Retire las puertas del horno
- Ubicacion de las patas del horno para multiples alturas de corte del armario
- Como hacer la conexion electrica
- Install Oven
- Instale el kit de deflector para cajon de calentamiento (solo para hornos instalados encima de un cajon de calentamiento)
- Vuelva a colocar las puertas del horno
- Finalizacion de la instalacion
11
CUTOUT DIMENSIONS (H)
Oven Size Oven Cutout Dimension
24" (61 cm) 22
1
/
2
" (57.2 cm)
27" (68.6 cm) 25
1
/
2
" (64.8 cm)
30" (76.2 cm) 28
1
/
2
" (72.4 cm)
36" (91.4 cm) 34
1
/
2
" (87.6 cm)
For the approved model number combinations, refer to the
undercounter label located on top of the oven chassis and on
the bottom of the cooktop burner box.
NOTE: For undercounter installation, it is recommended that the
junction boxes for oven and cooktop be located in the adjacent
right or left cabinet. A 1" (2.5 cm) minimum diameter hole should
have been drilled in the upper rear right or left corner of the side
wall surface to pass the appliance cable through to the junction
box.
Approved Built-In Oven and Induction Cooktop Combinations
A. 24" (61 cm) cabinet depth
B. 25" (63.5 cm) countertop
depth
C. Recommended oven and
cooktop junction box
locations
D. Allow 5/8" (1.6 cm) for
oven trim to overlap on
each side.
E. 27
3
/
4
" (70.5 cm) minimum
cutout height
F. 36" (91.4 cm) from cabinet
base to countertop
G.
4
5
/
8
" (11.7 cm) maximum
from cabinet base. If
dimension āFā is greater
than 36" (91.4 cm),
dimension āGā can be
increased the same
difference for induction
combinations
H. See Cutout Dimensions
chart
I. 31
3
/
8
" (82.2 cm) from top
of countertop to bottom of
cutout
CUTOUT DIMENSIONS (H)
Oven Size
Minimum Oven Cutout
Dimension
24" (61 cm) 22
1
/
2
" (57.2 cm)
27" (68.6 cm) 25
1
/
2
" (64.8 cm)
30" (76.2 cm) 28
1
/
2
" (72.4 cm)
For the approved model number combinations, refer to the
undercounter label located on top of the oven chassis and on
the bottom of the cooktop burner box.
NOTE: For undercounter installation, it is recommended that the
junction boxes for oven and cooktop be located in the adjacent
right or left cabinet. A 1" (2.5 cm) minimum diameter hole should
have been drilled in the upper rear right or left corner of the side
wall surface to pass the appliance cable through to the junction
box.
Approved Built-In Oven and Gas Cooktop Combinations
A. 24" (61 cm) cabinet depth
B. 1" (2.5 cm) clearance to
bottom of countertop
C. 25" (63.5 cm) countertop
depth
D. Recommended oven
junction box locations
E. 1" (2.5 cm) clearance to
cabinet
F. 27
3
/
4
" (70.5 cm) minimum
cutout height
G. Allow 5/8" (1.6 cm) for
oven trim to overlap on
each side.
H. 36" (91.4 cm) from cabinet
base to countertop
I. 31
3
/
8
" (79.7 cm) from top of
countertop to bottom of
cutout
J. Gas line through wall
10
1
/ 2
" (26.7 cm) to center
of
cutout
K. 3
1
/
4
" (8.3 cm)
L. Gas line through floor
10
1
/2
" (26.7 cm) to center
of
cutout
M. 3
1
/
2
" (8.9 cm)
N. 4
5
/
8
" (11.7 cm) maximum
from cabinet base
O. See Cutout Dimensions
chart