OVEN SAFETY Your safety and the safety of others are very important. We have provided many Important safety messages In this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kil or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or "WARNING.
FEATURE GUIDE This manual covers several models. Your modal may have some or all of the rems listed. Refer to this manual or Frequently Asked Questions (FAQs) section of our website at www.whiripool.com for mots detailed instructions. In Canada, reference the Customer Services section at www.whirlpool.ca. Food Poisoning Hazard Do not let food sk In oven more than one hour before or after cooking. Dong 3o can result In food poisoning or sickness.
KEYPAD FEATURE INSTRUCTIONS BROIL Broiling Cross BROIL. Press the number keypads 1o set tha desired tem] e, f the temperature sneered Is not in the range of tha temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable mange. Cross START, and then allow the oven to preheat for 2 minutes. Position the cookware in the oven and close the door. Cross CANCEL when finished.
Audible Tones Disable Turns off all tones, including the end of cycle tone and key press tones. 1. Crass SETTINGS until “SOUND" Is displayed. 2. The current setting will be displayed. 3. Press the “1” keypad to adjust the siting. 4. Press CANCEL to exit and display the time of day. Sound Volume Sets the pitch of the tone to either high or low. 1. Press SETTINGS until “SOUND VOLUME" Is displayed. 2. The current setting will be displayed. 3. Press the “1” keypad to adjust the setting. 4.
Hold Warm Food Poisoning Hazard Do not let food sit In oven more than one hour before or after cooking. Dong so can result In food poisoning or sickness. To Adjust Temperature: 1. Press the number keypad as Instructed by the scrolling text to select the new temperature. NOTE: The temperature adjustment will not appear on the display, and no tones will sound. The scrolling text will be shown on the display as it was before the keypad was pressed. 2. Press START.
Multiple Rack Cooking 2-rack: Use rack positions 2 and 4 for regular baking. Baking Layer Cakes on 2 Racks For best results when baking cakes on 2 racks, use rack positions §hand 4 with the Bake function. Place the cakes on the racks as own. Baking Cookies on 2 Racks For best results when baking cookies on 2 racks, use rack positions 2 and 4 with the Bake function. Bake ware To cook food evenly, hot air must be able to circulate. Allow 2" (5.0 cm) of space around bake ware and oven walls.
To Set a Delayed Timed Cook: 1. Press DELAY START. 2. Press the number keypads to enter the number of hours and/or minutes you want to delay the start time. 3. Press BAKE. Delay Start does not work for Roll. 4. Crass the number keypads to set the desired temperature. If the temperature entered is not in the range of the temperatures allows, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range. 5. Press START or COOK TIME. 6.
To Delay Start Self-Clean: 1. Lose the oven door, and then press DELAY START. 2. Press the number keypads to enter the desired amount of time by which you want to delay the start. 3. Press CLEAN MODES. 4. Choose the clean label desired by pressing the appropriate number keypad as instructed by the scrolling text. §. Press START. The oven door will automatically lock after the Delay Start countdown. When the Self-Clan cycle is complete and the oven cools, the vane door will unlock. 6.
PROBLEM SOLVER First try the solutions suggested here. If you need further assistance or mots recommendations that may help you avoid a services call, refer to the warranty page In this manual and scan the cued there with your mobile devices, or visit in Canada, visit Contact us by mail with any questions or concerns at the address below: In the USA.
ACCESSORIES For accessories In the you can visit our website at www.whirlpool.com or call us at 1-800-253-1301. In Canada, visit our website at www . whirlpool.ca or call us at 1-800-807-6777.
WHIRLPOOL® MAJOR APPLIANCE LIMITED WARRANTY ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE. Please have the following information available when you call the Customer experience Nectar: m Name, address and telephone number Mods! number and serial number A clear, detailed description of the problem Proof of purchase Including dealer or retailer name and address IF YOU NEED SERVICE: 1. questions can be addressed without service.
RET R o)y thrombolyse MERCI d'avoir acheté ce produit de grande qualité. Enregistrer le four sur www.whirlpool.ca. Pour référence ultérieure, consigner par écrit les numéros de modelé et de série de votre produit. Ces derniers peuvent se trouver dans le coin inférieur droit du cadre du four, & |'intérieur de la porte du four. Numéro de modale Numéro de série Table des matières SÉCURITÉ DU FOUR... QUID DES CARAÏTE! UTILISATION DU FOUI Commandes électron Maintien au chaud Soda Papier d’aluminium. ..
SÉCURITÉ DU FOUR Votre sécurité et celle des autres est trais Importante. Nous donnons de nombreux messages de sécurité importants dans ce manie! et sur votre appareil ménager. Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer. Volcan le symbole d'alerte de sécurités. Ca symbole d'alerte do sécurité vous signale les dangers potentiels de décis ot de assurables graves & vous ot & d'autres.
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ AVERTISSEMENT : Pour réduire le risque d'incendie, de choc électrique, de blessures corporalités ou de dommages lors de l'utilisation du four, il convient d'observer certaines précautions §élémentaires dont les suivantes : u Installation appropriée — S'assurer que le four est convenablement Installé et Rolle |a terre par un technicolor qualifié. No Jamal utiliser le four pour chauffer ou réchauffer une pince.
UTILISATION DU FOUR Des odeurs et de la fumée sont normales lorsque le four est utilisé la première fois, ou lorsqu'il est arts sale. IMPORTANT : Certains oiseaux sont trais sensibles aux émanations de fuma. L'exposition aux émanations peut entraîner la mort de certains oiseaux. Toujours déplacer les oiseaux dans une autre place fermée et ben arde. Commandes électroniques du four Affichage des commandes L'affichage clignote lorsqu'il est mis en marche ou après une coupure ds courant.
Mode démo IMPORTANT : Ce mode est congru pour le personnel de vente en rayon avec une alimentation de 120V et permet de présenter le fonctionnement des caractéristiques du tableau de commande sans pour autant activer les cléments de chauffage. Si quetta caractéristique est activée, le four ne fonctionnera pas. 1. Appuyer sur MEETINGS (réglages) jusqu'a ce que "DÉMO MODE” (doms de démonstration) s'affiche. 2. Réglages utilisé & ce moment-a s'affiche. 3. Appuyer sur la touche “1” pour modifier lo réglage.
Activation du mode Sabbat : 1. Appuyer sur la touche BAQUE {cuisson au four). 2. Utiliser les touches numériques pour régler la température souhaitée. Si la température entrée ne se trouve pas dans la fourchette des températures autorisées, la température minimale ou maximale autorisée s affiche. Entrer une température dans la fourchette autorisée. 3. Appuyer sur STAR (mise en marche).
Évent du four Tableau de commande B. Vont du four C. Four L'évent du four ne doit &tre ni obstrué ni couvert, car il permet l'introduction de I'air frais dans le système de refroidissement. D'autre part, |'évent inférieur ne doit pas &tre obstrué ni recouvert car |l parme |'Introduction d’ale férals dans le système ds refroidissement et |'évacuation de |'air chaud en provenance du système de refroidissement.
ENTRETIEN DU FOUR Programme autonettoyante {sur certains modelés) Risque de brûlures Ne pas toucher Is four au cours du programme autonettoyante. Garder les enfants loin du four au cours du programme autonettoyante. Le non-respect de ces Instructions peut causer des brasures. IMPORTANT : La santé ds certains oiseaux est trais sensible aux émanations qui surviennent durant le programme autonettoyante. Exposition aux émanations peut entraîner la mort de certains oiseaux.
Pour différer auto nettoyage : 1. Fermer a porte de fours et appuyer sur DÉLAI STAR (mise en marche différée). 2. Appuyer sur les touches numériques pour entrer la durée différée du programme. 3. Appuyer sur CLEAN MODES {modes de nettoyage). 4. Choisir le degré de nettoyage souhaité en appuyant sur la touche numérique adéquate selon ce qui est indiqué par le tests déroulant. 5. Appuyer sur STAR (mise en marche).
RÉSOLUTION DE PROBLÈMES Essayer d'abord les solutions suggérées ici. Pour obtenir de |'aide ou des conseils qui permettront peut-être d'éviter une intervention de dépannage, consulter |a page de garantie de ce manuel st scanner Is code QR cava votre appareil Intelligent, ou consultez Is state Tintement Vous pouvez adresser tous commentaires ou questions par courrier 'adresse ci-dessous : Au Canada: Whirlpool Brand Home Appliances Costumer expérience Centre 200 6750 Centurie Ave.
PROBLÈME CAUSES ET/OU SOLUTIONS POSSIBLES La cuisson au four ne produit pas les résultats prévus Le réglage de la température était incorrect : Revérifier la recette dans un livre de cuisine fiable. La température du four colt &tre ajustée : Voir ‘Commande de température du four” dans la section “Commandes Électroniques du four”. Le four n'a pas été préchauffé : Voir la section “Cuisson au four et ratissage.
ACCESSOIRES Pour les accessoires, consulter notes site Web www.whirlpool.ca ou nous contacter au 1-800-807-6777.
~ GARANTIE LIMITÉE DES | §3:8ir 1% For Genre L APPLICATION DE LA GARANTE RAIE Ls ossifier: de la clientèle, veuillez garder & MÉNAGERS ipse WHI POOL@ = Une description claire et détaillée du probité rencontré m Une preuve d'achat Incluant le nom et |'adresse du marchand ou du détallant §1 TOUS AVEZ BESOIN DE SERVICE : 1. Avant de nous contacter pour obtenir un dépannage, veuillez déterminer si des réparations sont nécessaires pour = " = votre produit.