Dimension Guide
2
Approved Built-In Oven and Induction Cooktop Combinations
See product website for a list of cooktop models approved for use above select wall-oven models.
NOTE: For undercounter installation, it is recommended that the junction boxes for the oven and cooktop be located in the adjacent
right or left cabinet. A 1" (2.5 cm) minimum diameter hole should have been drilled in the upper rear right or left corner of the side wall
surface to pass the appliance cable through to the junction box.
A
E
F
G
H
B
C
C
D
I
A. 24" (61 cm) cabinet depth
B. 25" (63.5 cm) countertop depth
C. Recommended oven and cooktop junction box locations
D. Allow 5/8" (16 mm) for oven trim to overlap on each side
E. 27
3
/
4
" (70.5 cm) minimum cutout height
F. 36" (91.4 cm) from cabinet base to countertop
G. 4
5
/
8
" (11.7 cm) maximum from cabinet base. If dimension āFā is
greater than 36" (91.4 cm), dimension āGā can be increased the
same difference for induction combinations.
H. See Cutout Dimensions chart
I. 31
3
/
8
" (79.7 cm) from top of countertop to bottom of cutout
Cutout Dimensions
Oven Size Oven Cutout Dimension
24" (61 cm) 22
1
/
2
" (57.2 cm)
27" (68.6 cm) 25
1
/
2
" (64.8 cm)
30" (76.2 cm) 28
1
/
2
" (72.4 cm)