Instructions for Use Istruzioni per l’uso Gebrauchsanweisung Mode d’emploi Instrukcja użytkowania
PRECAUTIONS AND GENERAL RECOMMENDATIONS 1. Packing The packaging materials are 100% recyclable and marked with the recycling symbol 2. . Removing the packaging and inspecting the contents After unpacking, make sure the appliance is undamaged and the door closes correctly. If in doubt, contact a qualified technician or your local retailer. 3. 4. 5. - Before using the appliance for the first time The appliance is designed to operate with a minimum ambient temperature of 5°C.
DISHWASHER DESCRIPTION 1 2 3 10 9 8 7 4 6 11 5 1 - Cutlery Rack 5 - Control Panel 2 3 4 - - Cutlery Basket 6 - Rinse aid dispenser 10 - Upper rack - Lower Rack 7 - Filter 11 - Light on the floor (if available) - Detergent dispenser 8 - Lower spray arm 9 Upper spray arm The location of the control panel may differ depending on the dishwasher model.
FIRST TIME USE After connecting the appliance to the power supply, the device must be programmed. The display will guide the user to set up the appliance for first use. 1. The language selection ENGLISH P =NO, fflst =YES To select preferred language please press button. Confirm pressing button. After language confirmation, the appliance will go through the settings. 2. Setting the water hardness WATER HARDNESS <1=Min, 7=Max> The water hardness is by default set to level 4.
4. Detergent type operation DETERGENT TYPE OPERATION DO YOU USE P =NO, fflst =YES In this step it is very important to choose what type of detergent will be used (tablet/capsule or gel/powder). If you prefer to use multiphase detergent in tablet or capsule for washing - press 6. Open tap operation on the next page. The symbol , then go to step on display will be lit. If you prefer to use gel or powder detergent for washing - press operation. , then go to step 5.
. Open tap operation OPEN TAP Check water tap is open. If closed, open it then confirm by pressing button. OPERATION PLEASE OPEN THE fflst = DONE WATER TAP fflst = DONE 7. First cycle operation FIRST CYCLE OPERATION PLEASE RUN THE fflst = OK INTENSIVE CYCLE Before normal use of appliance it is recommended to run Intensive cycle first, to calibrate the appliance. Insert a detergent into dispenser chamber A (see below), then press Press button to choose Intensive program, press . and close the appliance door.
20 20 30 30 When dishes are heavily soiled, fill chamber B with 5 grams of detergent. If Multifunctional detergent in one dose (tablet/capsule) is used, it has to be inserted into chamber A. Option Tablet has to be chosen! Shut the cover by pressing dedicated ribs. Use only one tablet/capsule per cycle, placed in detergent dispenser. Some types of tablets/capsules may not dissolve completely during the short cycles (Fragile, Rapid).
Upper rack In upper rack you can load glasses, cups, bowls. On the right side of the rack, small dishes (tea or coffee cups) can be loaded. Foldable flaps A can be opened and used to load stemmed glasses, long utensils or coffee cups. Plate holders B can be folded down to load bowls. A - CLOSED A - CLOSED A - OPEN A - OPEN TO OPEN A: TO OPEN A: CLICK! Rotate the Rotate theflap flap clockwise and and hook clockwise on rack.
How to use PowerClean® PowerClean® uses special water jets to provide an intensive wash for shallow dishes and pans loaded centrally to the PowerClean® area. G 1. Adjust the PowerClean® area G folding down rear plate holders to load pots. 2. Load pots and casseroles inclined vertically in PowerClean® area. Pots have to be inclined towards the power water jets. PROGRAMMING E1 E2 E3 5. ECO 50ºC Duration 3:20 The list of available programs and options can be found in program table on next page.
PROGRAM TABLE Program Program description No. a. Name à (Loading information) Available options Detergent A B Use for normal soiled dishes with dried-on food. Senses the level of soiling on the dishes and adjusts the program accordingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated. The PowerClean® option is activated automatically with this program. To deactivate, press the PowerClean® button on the control panel.
ADDITIONAL OPTIONS With each program additional options can be used. A full list of available options working with specific programs can be found in the Program Table on the previous page. All active options are shown on the display in the Option area. Multizone - allows you to choose the washing zones. Press button to select the wash zones between: 1. Washing all baskets (default). 2. Washing upper basket and cutlery rack. On the display symbol is lit. 3. Washing lower basket and cutlery basket.
MENU/SETTINGS SETTINGS If you want to change any of the appliance parameters, press On the display the word "SETTINGS" will be shown. Press To exit settings in any step, press button for 3 seconds. to scroll to change values. . Press P to Scroll Settings Press fflst to Change values 1. Tablet P TABLET fflst Enabled P . To enable or disable Tablet option press . To go to the next setting press If this option is enabled the symbol is lit. TABLET fflst Disabled 2.
6. Reset to factory default P This function allows you to reset the appliance to the factory settings. To use this function press button. FACTORY DEF. fflst OK First setup wizard appears as a next step. You need to set all parameters again including a choice of language. 7. Exit P To exit menu press EXIT button. Press to come back to the first step. fflst OK MAINTENANCE AND CARE For hygienic reasons it is recommended to run a high-temperature cycle (e.g. Intensive) at least once per month.
WHAT TO DO IF... If fault occurs, before contacting the After-sales Service, make the following checks to try and remedy the problem. Most faults can be remedied by taking the following action, quickly restoring normal appliance operation. The appliance... Possible causes... Solutions... Display shows: CHECK SALT or REFILL SALT Salt reservoir is empty. Refill reservoir with salt (see page 4). Adjust water hardness (see page 4).
Crockery and cutlery... ... are not perfectly clean/have food residues Possible causes... Solutions... Too little space between dishes (incorrect arrangement of the concave items in the rack). Arrange crockery so that the items do not touch each other. Concave items (e.g. bowls, cups) must be arranged facing downwards in the rack. Too little detergent, detergent too old or incorrectly stored. If necessary, use more detergent observing the manufacturer's indications regarding dosage.
Crockery and cutlery... Possible causes... Solutions... ...other marks Rinse aid dosage too low. In the presence of marks, increase the rinse aid dosage (see page 5). If you use a combined action detergent (tablet/capsule), try adding more rinse aid. ...streaks Rinse aid dosage too high. In the presence of streaks, reduce the rinse aid dosage (see page 5). If you use a combined action detergent (tablet/capsule) which includes rinse aid, do not add any additional rinse aid. ...