Quick Start Guide

W11219943A
W11219993A - SP
®
/
™
©2018 Whirlpool. All rights reserved.
Used under license in Canada.
08/18
Quick Reference Guide
NOTE: See your Use and Care Guide for more
information. Not all settings and options are available
on each cycle.
Fire Hazard
Never place items in the washer that
are dampened with gasoline or other
flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any
type of oil on it (including cooking oils).
Doing so can result in death, explosion,
or fire.
Using Your Smart All-In-One Washer and Dryer
ADD LAUNDRY PRODUCTS, IF DESIRED
Before washing clothes for the rst time,
choose the Regular/Quick cycle and run it
without clothes. This initial cycle serves to
ensure the interior is clean before washing
clothes.
3
RUN WASH CYCLE WITHOUT
LAUNDRY
Your washer/dryer comes equipped with
Load & Go
™
bulk dispensers, which allow
you to ll detergent and fabric softener
once and skip rells for multiple loads.
Add liquid HE detergent to Dispenser 1 and
liquid fabric softener or liquid HE detergent
to Dispenser 2. Use HE detergent only.
To Fill Bulk Dispeners:
Open the dispenser
drawer, gently pull up
on the dispenser lid tab,
and ll to the “MAX”
line.
IMPORTANT: Do
not use chlorine
bleach or powdered
detergent in the bulk dispenser. Powdered
detergent must be added to the single-
load dispenser. Also, if using detergent
in both dispensers or using a detergent
concentration other than 2x, see your Use
and Care Guide for initial setup.
SET UP LOAD & GO
™
BULK
DISPENSERS
DOING LAUNDRY:
BEFORE FIRST USE:
LOAD LAUNDRY
5
Single-dose laundry packets, Oxi-type
boosters, color-safe bleach, or scented
crystals can be added to the drum prior
to adding laundry. When using single-dose
laundry packets, make sure that the bulk
dispenser is disabled or off (see Step 12).
Place a load of sorted
items loosely in the
washer/dryer. For
optimal drying and
cycle time, load the
drum no more than half full and do not open
the door during the drying cycle.
IMPORTANT: Push load fully into the
washer/dryer. Make sure no items are resting
on the rubber seal to avoid trapping them
between the seal and the door window.
2
4
ADD HE DETERGENT, IF DESIRED
If you choose to use the Single-Load Dispenser
instead of the bulk dispenser, add detergent to
the appropriate compartment at this time. Use
Tools to disable the bulk dispenser (see Step 12).
ADD LIQUID FABRIC SOFTENER
AND CHLORINE BLEACH TO SINGLE-
LOAD DISPENSER, IF DESIRED
7
TOUCH POWER TO TURN ON
WASHER/DRYER
1
SELECT PROGRAM/CYCLE
8
SELECT TEMPERATURE
AND SPIN SPEED, IF DESIRED
9
SELECT DRYING FUNCTION,
IF DESIRED
10
TOUCH AND HOLD START/PAUSE
TO BEGIN CYCLE
13
To cancel a cycle, touch the
“X” on the touch screen to
the right of the estimated time
remaining.
If you choose to use the Single-Load Dispenser
instead of the bulk dispenser for liquid fabric
softener, add fabric softener to the appropriate
compartment at this time. Use Tools to disable
the bulk dispenser (see Step 12).
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
SELECT OPTIONS, IF DESIRED
11
Options include: Soil Level, Extra
Rinse, Pre-Soak, FanFresh
®
, and
Wrinkle Shield
™
.
USE TOOLS, IF DESIRED
12
Touch this button to change other
settings, including: Load & Go
™
Dispensers, Control Lock, Mute,
Utility Cycles, Preferences, WiFi,
and Info.
6
Start/
Pause
Button
Power
Button
LCD
Screen
Home
Button
Remote Enable
Button
Favorites
Button
Tools
Button
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
From the home screen, touch the “What
to Wash” area of the screen to select the
program that best matches the items you
want to wash. Touch the “How to Wash”
area of the screen to select the program
that best matches the method that you
would like for washing those items.
MAINTENANCE
• Run Clean Washer cycle every 30 loads.
The washer will also give you a reminder.
• Leave door open for ventilation when
machine is not in use.
• Check door seal between cycles. Clean
out small items and/or debris if present.
• Clean drain pump lter occasionally.