Installation Instructions

15
LEVEL DRYER
1. Level dryer
Place
level here
Not Level LEVEL Not Level
Check levelness of dryer from
side to side. Repeat from front to back.
NOTE: The dryer must be level for the moisture-sensing
system to operate correctly. If forward slope of dryer is
greater than 1" (25 mm), water could run out from front
of lter.
2. Adjust leveling legs
If dryer is not level, prop up using a wood block, use a wrench
to adjust legs up or down, and check again for levelness.
Once dryer is level, make sure all four legs are snug against
the oor and dryer does not rock.
3. Plug into a grounded 3 prong outlet
4. Check for leaks
While running the rst cycle, check that there are no leaks
from the drain hose.