Dimension Guide

PRODUCT DIMENSIONS
French Door Bottom Mount Refrigerator
WRF532SMH, WRF540CWH, WRF535SMH
A
overall
B
top of
cabinet
H
not incl.
handle
F
incl.
handle
E
D
cabinet
G
90˚90˚
C
I
Model Number WRF532SMH WRF535SMH WRF540CWH
Model Size 22.1 cu. ft. 25.2 cu. ft. 20.0 cu. ft.
Height - Overall “A”
70
1
⁄
8
"
(178.1 cm)
70
1
⁄
8
"
(178.1 cm)
70
1
⁄
8
"
(178.1 cm)
Height - Top of
Cabinet “B”
68
7
⁄
8
"
(174.9 cm)
68
7
⁄
8
"
(174.9 cm)
68
7
⁄
8
"
(174.9 cm)
Depth - Doors Open
90° “C”
47
1
⁄
8
"
(119.7 cm)
48
1
⁄
8
"
(122.2 cm)
43"
(109.2 cm)
Depth - Drawer
Open “D”
52
1
⁄
8
"
(132.4 cm)
52
1
⁄
8
"
(132.4 cm)
45
3
⁄
8
"
(115.3 cm)
Depth - With
Handles “E”
34
1
/
2
"
(87.4 cm)
35
1
/
2
"
(89.9 cm)
30
1
/
2
"
(77.5 cm)
Depth - Without
Handles “F”
32"
(81.3 cm)
33"
(83.8 cm)
26
7
/
8
"
(68.3 cm)
Depth - Cabinet
Only “G”
28
1
/
8
"
(71.3 cm)
29
1
/
8
"
(73.9 cm)
24
1
/
8
"
(61.2 cm)
Width - Cabinet “H”
32
5
⁄
8
"
(82.9 cm)
35
5
⁄
8
"
(90.5 cm)
35
5
⁄
8
"
(90.5 cm)
Width - Door Open
90° “I”
40
3
⁄
8
"
(102.6 cm)
43
3
⁄
8
"
(110.2 cm)
43
3
⁄
8
"
(110.2 cm)
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Electrical: A 115 V, 60 Hz, AC only 15 A or 20 A fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your
refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.
NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the
model) to OFF and then disconnect the refrigerator from the electrical source. When you are nished, reconnect the refrigerator to the electrical source and reset
the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”
Water: A cold water supply with water pressure between 35 psi and 120 psi (241 kPa and 827 kPa) is required to operate the water dispenser and ice maker. If
you have questions about your water pressure, call a licensed, qualied plumber.
IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between
35 psi and 120 psi (241 kPa and 827 kPa).
Reverse Osmosis Water Supply:
If a reverse osmosis water ltration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of
40 psi to 60 psi (276 kPa to 414 kPa).