Owners Manual

Table Of Contents
3
REFRIGERATOR CARE
Cleaning
WARNING
Explosion Hazard
Risk of Fire or Explosion.
Flammable Refrigerant Used.
Do Not Use Mechanical Devices to Defrost Refrigerator.
Do Not Puncture Refrigerant Tubing.
Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to avoid odor
buildup. Wipe up spills immediately.
IMPORTANT:
Because air circulates between all sections, any odors formed
in one section will transfer to the other. You must thoroughly
clean all sections to eliminate odors. To avoid odor transfer
and drying out of food, wrap or cover foods tightly.
Do not use abrasive or harsh cleaners such as window sprays,
scouring cleansers, flammable fluids, muriatic acid, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on doors and cabinet, plastic
parts, interior and door liners or gaskets. Do not use paper
towels, scouring pads, or other harsh cleaning tools.
For stainless steel models, stainless steel is corrosion
resistant and not corrosion-proof. To help avoid corrosion of
your stainless steel, keep your surfaces clean by using the
following cleaning instructions.
Cleaning the Touch Screen Display on the
Dispenser Panel (on some models):
1. Make sure the refrigerator is unplugged or the power is
disconnected before wiping the screen to avoid unintentionally
changing the settings.
2. Mix a solution of mild detergent in warm water. Dampen a soft,
lint-free cloth with the solution and gently wipe the screen.
NOTE: Do not spray or wipe liquids directly onto the screen or
over-saturate the cloth.
3. Plug in refrigerator or reconnect power.
Cleaning the Interior:
IMPORTANT: Refrigerator shelves with under-shelf, LED lighting
are not dishwasher safe.
1. Unplug refrigerator or disconnect power.
2. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
3. Plug in refrigerator or reconnect power.
Cleaning the Exterior:
IMPORTANT: Damage to smooth finish due to improper use of
cleaning products or using non-recommended cleaning products
is not covered under the warranty. Sharp or blunt instruments will
mar the finish.
1. Unplug refrigerator or disconnect power.
2. Using a clean sponge or soft cloth and a mild detergent in
warm water, wash, rinse, and thoroughly dry stainless steel
and painted metal exteriors.
To keep your stainless steel refrigerator looking like new and
to remove minor scuffs or marks, it is suggested that you use
the manufacturer’s approved stainless steel cleaner and
polish. This cleaner is for stainless steel parts only. Refer to
the Quick Start Guide for ordering information.
NOTE : When cleaning stainless steel, always wipe in the
direction of the grain to avoid cross-grain scratching.
Do not allow the stainless steel cleaner and polish to come
into contact with any plastic parts such as the trim pieces,
dispenser covers, or door gaskets. If unintentional contact
does occur, clean plastic part with a sponge and mild
detergent in warm water. Dry thoroughly with a soft cloth.
3. Plug in refrigerator or reconnect power.
Style 1: Smooth Door/Painted Metal
DO USE DO NOT USE
Soft, clean cloth Abrasive cloths
Paper towels or newsprint
Steel-wool pads
Warm, soapy water with a
mild detergent
Abrasive powders or
liquids
Window sprays
Ammonia
Acidic or vinegar-based
cleaners
Oven cleaners
Flammable fluids
NOTE: Paper towels scratch and may dull the clear coat of the
painted door. To avoid possible damage, use only soft, clean
cloths to polish and wipe the door.