Dimensions

PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
Side by Side Refrigerator
WRS315SD WRS312SN
WRS315SN WRS321SD
WRS555SI WRSA15SN
WRS335SD WRS311SD
WRS331SD WRS325SD
Electrical: A 115-volt, 60-Hz, AC-only,
15- or 20-amp fused, grounded electrical
supply is required. It is recommended
that a separate circuit serving only your
refrigerator be provided. Use an outlet that
cannot be turned off by a switch. Do not
use an extension cord.
Water: A cold water supply with water
pressure of between 30 and 120 psi
(207 and 827 kPa) is required to operate
the water dispenser and ice maker. If you
have questions about your water pressure,
call a licensed, qualified plumber.
Reverse Osmosis Water Supply:
The pressure of the water supply coming
out of a reverse osmosis system going
to the water inlet valve of the refrigerator
needs to be between 30 and 120 psi
(207 and 827 kPa).
To ensure proper ventilation for your refrigerator, allow for ½" (1.27 cm) of space on each side
and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has
an ice maker, allow extra space at the back for the water line connections. When installing your
refrigerator next to a fixed wall, leave a 2" (5.08 cm) minimum space on each side (depending on
your model) to allow the doors to swing open.
NOTES:
This refrigerator is intended for use in a location where the temperature ranges from a
minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature
range for optimum performance, which reduces electricity usage and provides superior
cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the
refrigerator near a heat source, such as an oven or radiator.
Normal minimum cabinet cutout width required for product installation is 36" (91.44 cm).
However, if the product is placed against an extended wall and the ability to remove the crisper
pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet
opening width of 54" (137.16 cm) is recommended.
LOCATION REQUIREMENTS
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W11105301A
8/17
PRODUCT DIMENSIONS
D
overall
C
top of
cabinet
incl.
handle
B
not incl.
handle
A
90˚ 90˚
F
E
Handle and door style will vary
with model.
Dimensions “Cand “D” include
rollers extended " (1.9 cm).
3
4
Model
Number Model Size
Depth Without
Handles
“A”
Depth -
With Handles
“B”
Cabinet Height
“C”
Overall height
“D”
Cabinet Width
“E”
Depth “F” with
Doors Open 90°
MSC21C6M 20.6 cu. ft. 27½"
(69.9 cm)
29¾"
(75.6 cm)
68
7
8"
(174.9 cm)
69"
(175.3 cm)
35½"
(90.2 cm)
45
7
8"
(116.5 cm)
MSS26C6M 25.6 cu. ft
32¾"
(83.2 cm)
34
1
2"
(87.6 cm)
68
7
8"
(174.9 cm)
69"
(175.3 cm)
36"
(91.4 cm)
51
1
8"
(129.9 cm)
1
/
2" (1.27 cm)
2" (5.08 cm)

Summary of content (1 pages)