Installation Instruction

Final Installation

Installing the access cover and forming

the copper tubing

1. Reinstall the rear access cover on the refrigerator so the

water valve tubing is inside the cover, and the copper water

line is outside (see the diagram below), then secure the cover

with the seven hex-head screws you removed earlier.

2. Loop the copper tubing coming from the water valve as

shown. Position the coiled copper tubing near the center of

the unit so that it forms an “accordion-fold” (as shown in the

diagram below) when it is moved

to-and- from the wall.

Rear access

cover

Hex-head

screws

Copper tubing

Form tubing

loops as

shown

Place water

valve tubing

behind cover

Hex-head

screws

Installing the access cover and forming the copper tubing