Owner Manual

10
IMPORTANT:
■ Give your refrigerator time to cool down completely before
adding food. It is best to wait 24 hours before you put food
into the refrigerator.
NOTE: Adjusting the Temperature control to a higher (colder)
setting will not cool the compartments any faster.
■ If you add food before the refrigerator has cooled completely,
your food may spoil.
Adjust the Temperature Control
The mid-settings should be correct for normal household usage.
The controls are set correctly when milk or juice is as cold as you
like and ice cream is rm.
If the temperature is too warm or too cold in the refrigerator or
freezer, rst check the air vents to be sure they are not blocked.
If you need to adjust temperatures, use the settings listed in the
chart below as a guide. On models with two controls, adjust the
refrigerator temperature rst. Wait at least 24 hours between
adjustments and then recheck the temperatures.
CONDITION/REASON: ADJUSTMENT:
REFRIGERATOR section too
warm
■ Door opened often, large
amount of food added or
room temperature very
warm
Adjust REFRIGERATOR
control one setting higher.
FREEZER section too warm/ice
not made fast enough
■ Door opened often, large
amount of food added or
very cold room temperature
(can’t cycle often enough)
■ Heavy ice usage
Adjust AIRFLOW or
REFRIGERATOR control one
setting higher.
REFRIGERATOR section too
cold
■ Controls not set correctly for
your conditions
Adjust REFRIGERATOR
control one setting lower.
FREEZER section too cold
■ Controls not set correctly for
your conditions
Adjust AIRFLOW or
REFRIGERATOR control one
setting lower.
Airow Control
The Airow control regulates the amount of air owing between
the freezer and the refrigerator compartments.
When you plug in the refrigerator for the rst time, turn the Airow
control to the Recommended setting.
Adjusting the Airow Control
If you want to temporarily increase the cold airow to a specic
compartment, adjust the control.
■ Max - Increase airow to the freezer.
■ Min - Increase airow to the refrigerator.
IMPORTANT: Once the performance is achieved, return the
Airow control to the Recommended setting to keep the
refrigerator operating at optimum efciency.
CONDITION/REASON: ADJUSTMENT:
Heavy ice use Max
Hot room temperature Max - To maintain ice making
production rate
Large quantity of groceries Min - To quickly chill food and
beverages
Ice Maker
(on some models)
For products without any part of the ice dispensing circuit, ice
maker and internal water circuit parts can only be installed by the
Manufacturer or by its Service Agent.
For Easy Connect (ice maker ready) products, ice maker can be
easily installed by the User, following instruction given with the
kit.
In "Accessories" part of this manual you can nd the ice maker
part number to be purchased.
Turning the Ice Maker On/Off
NOTE: Do not force the wire shutoff arm up or down.
■ To turn the ice maker on, simply lower the wire shutoff arm.
NOTE: Your ice maker has an automatic shutoff. As ice is
made, the ice cubes will ll the ice storage bin and the ice
cubes will raise the wire shutoff arm to the OFF (arm up)
position.
■ To manually turn the ice maker off, lift the wire shutoff arm to
the OFF (arm up) position and listen for the click to make sure
the ice maker will not continue to operate.