Installation Instructions

Before You Begin

Tools

Gather required tools and parts before starting installation. Read

and follow the instructions provided with any tools listed here.

1. Regular screwdriver

2. Phillips screwdriver

3. 7⁄16" and 1⁄2" open-end wrenches (or an adjustable wrench)

4. Pliers

5. 1⁄4" nut driver

6. Hand drill with 1⁄4" drill bit

7. Small hand level (optional)

8. Small 3⁄4-round le

9. Tubing cutter

10. Center punch

11. Hammer

12. Scissors

13. Ruler

14. Step stool (optional)

Installation notes

1. Follow the instructions carefully. Read through the entire step

so that you understand it before you perform it.

2. The illustrations in this Installation Guide are meant to clarify

the installation steps you need to perform. For each set

of steps shown, refer to the diagram immediately beside

or below the text for clarication. Some illustrations also

contain “DETAILS.” DETAILS are contained in bubbles

alongside the larger illustration. A DETAIL shows a close-up

illustration of a certain portion of a diagram or an illustration

of a specic step you are to perform. DETAILS are labeled A,

B, or C and are clearly referenced in each step.

3. When you are instructed to install a part, position the part as

shown in the illustration.