Use and Care
Table Of Contents
- REFRIGERATOR SAFETY
- INSTALLATION INSTRUCTIONS
- REFRIGERATOR USE
- REFRIGERATOR CARE
- TROUBLESHOOTING
- Refrigerator Operation
- WATER FILTER CERTIFICATIONS
- PERFORMANCE DATA SHEETS
- SÉCURITÉ DU RÉFRIGÉRATEUR
- INSTRUCTIONS D’INSTALLATION
- UTILISATION DU RÉFRIGÉRATEUR
- ENTRETIEN DU RÉFRIGÉRATEUR
- DÉPANNAGE
- FEUILLES DE DONNÉES SUR LA PERFORMANCE
- SEGURIDAD DEL REFRIGERADOR
- INSTRUCCIONES DE INSTALACIÓN
- USO DE SU REFRIGERADOR
- CUIDADO DEL REFRIGERADOR
- SOLUCIÓN DE PROBLEMAS
- Funcionamiento del refrigerador
- CERTIFICACIONES DE FILTROS DE AGUA
- HOJAS DE DATOS DE RENDIMIENTO
19
■ Reverse osmosis water ltration system connected to
your cold water supply? This can decrease water pressure.
See “Water Supply Requirements.”
Water is leaking from the dispenser system
NOTE: One or two drops of water after dispensing is normal.
■ Glass not being held under the dispenser long enough?
Hold the glass under the dispenser 2 to 3 seconds after
releasing the dispenser lever.
■ New installation? Flush the water system. See “Water and
Ice Dispenser.”
■ Recently changed water lter? Flush the water system. See
“Water and Ice Dispenser.”
Water from the dispenser is warm
NOTE: Water from the dispenser is only chilled to 50°F (10°C).
■ New installation? Allow 24 hours after installation for the
water supply to cool completely.
■ Recently dispensed large amount of water? Allow 24 hours
for water supply to cool completely.
■ Water not been recently dispensed? The rst glass of water
may not be cool. Discard the rst glass of water.
■ Refrigerator connected to a cold water pipe? Make sure
the refrigerator is connected to a cold water pipe. See “Water
Supply Requirements.”
WATER FILTER CERTIFICATIONS