Setup and user guide

ManualsBrandsWhirlpool ManualsDishwashersWSFP 4O23 PF X

Before using the appliance carefully read Health and Safety guide.

APPLIANCE

PRODUCT DESCRIPTION

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance, please register your appliance on:

www.whirlpool.eu/register

1. Upper rack

2. Cutlery rack

3. Foldable aps

4. Upper rack height adjuster

5. Upper spray arm

6. Lower rack

7. Power Clean® support

8. Lower spray arm

9. Filter Assembly

10. Salt reservoir

11. Detergent and Rinse Aid dispensers

12. Rating plate

13. Control panel

8 9 10 12 13 141 2 3 4 5 1615 17 18 2019

1. ON-OFF button

2. PREVIOUS button

3. NEXT button

4. Tablet Detergent (All-in-one) button

5. Multizone button / Key Lock

6. Multizone indicator lights

7. Eco program indicator light

8. Start Delay indicator light

9. Display

10. Program number and remaining time indicator

INSTRUCTION FOR USE

CONTROL PANEL

11. Key Lock indicator light

12. Closed water tap indicator light

13. Rinse Aid rell indicator light

14. Salt rell indicator light

15. Tablet Detergent (All-in-one) indicator light

16. Sani Rinse button with indicator light

17. Turbo button with indicator light

18. Power Clean® button with indicator light

19. Start Delay button with indicator light

20. START/Pause button with indicator light

0000 000 00000

Service:

1112

Summary of content (12 pages)

PAGE 1
EN INSTRUCTION FOR USE THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive a more complete assistance, please register your appliance on: www.whirlpool.eu/register Before using the appliance carefully read Health and Safety guide. PRODUCT DESCRIPTION APPLIANCE 2 1 4 3 7 5 6 10 8 9 Service: 0000 000 00000 12 11 1. 2. 3. 4. 5. 6. Upper rack Cutlery rack Foldable flaps Upper rack height adjuster Upper spray arm Lower rack 7. 8. 9. 10. 11. 12. 13.
PAGE 2
FIRST TIME USE SETTING MENU AND SALT ADVICE REGARDING THE FIRST TIME USE After installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack. The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components. • It is important that the salt reservoir be never empty. SETTING MENU 1. Switch on the appliance by pressing the ON/OFF button. 2. Switch off the appliance by pressing the ON/OFF button. 3.
PAGE 3
EN FIRST TIME USE RINSE AID AND DETERGENT FILLING THE RINSE AID DISPENSER FILLING THE DETERGENT DISPENSER Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light in the control panel is lit. Only use detergent which has been specifically designed for dishwashers. To achieve the best washing and drying results, the combined use of detergent, rinse aid liquid and refined salt is required.
PAGE 4
PROGRAMS TABLE Detergent container Water consumption (litres/cycle) Energy consumption (kWh/cycle) 50° 4:00 9.0 0.74 P2 6th Sense 50-60° 1:20 - 3:00 7.0 - 14.0 0.70 - 1.10 P3 Intensive 65° - 2:40 17.0 1.30 P4 Daily 50° - 1:20 10.0 1.10 P5 Crystals 45° - 1:40 12.0 1.00 P6 Rapid 30’ 50° - 0:30 9.0 0.50 P7 Silent 50° - 3:35 16.5 1.00 0:10 4.5 0.01 0:50 9.5 0.
PAGE 5
EN OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. TABLET DETERGENT (All-in-one) This setting allows you to optimize the performance of the program according to the type of detergent used.
PAGE 6
LOADING THE RACKS CUTLERY RACK The third rack was designed to house the cutlery. Arrange the cutlery as shown in the figure. A separate arrangement of the cutlery makes collection easier after washing and improves washing and drying performance. LOWER RACK For pots, lids, plates, salad bowls, cutlery etc... Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm.
PAGE 7
EN DAILY USE 1. CHECK WATER CONNECTION Check that the dishwasher is connected to the water supply and that the tap is open. 2. LOAD THE RACKS (see LOADING THE RACKS). The machine will switch off automatically during certain extended periods of inactivity, in order to minimise electricity consumption. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. 3.
PAGE 8
CARE AND MAINTENANCE ATTENTION: Always unplug the appliance when cleaning it and when performing maintenance work. Do not use flammable liquids to clean the machine. CLEANING THE DISHWASHER Any marks on the inside of the appliance may be removed using a cloth dampened with water and a little vinegar. The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
PAGE 9
EN INSTALLATION ATTENTION: If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. ELECTRICAL CONNECTION CONNECTING THE WATER SUPPLY Before inserting the plug into the electrical socket, make sure that: Adaptation of the water supply for installation should only be performed by a qualified technician.
PAGE 10
TROUBLESHOOTING Your dishwasher may not work properly. Before contacting the Service Centre check if the problem can be solved by going through the following list. PROBLEMS POSSIBLE CAUSES SOLUTIONS The dishwasher won’t start or does not respond to commands. The appliance has not been plugged in properly. Insert the plug into the socket. Power outage. The dishwasher starts automatically when the power returns. The dishwasher door is not closed. Vigorously push the door until you hear the “click”.
PAGE 11
EN PRODUCT FISCHE The technical data containing the energy consumption data can be downloaded from the website: docs. whirlpool.eu CONTACTING AFTER-SALES SERVICE You can find our contact details in the warranty manual. When contacting our Client After-sales Service, please state the codes provided on your product’s rating plate.
PAGE 12
400011258541B 07/2018 as - Xerox Fabriano 12