Use and Care Guide

9
Wash Temp Suggested Fabrics
8. Select WASH TEMP
Select the Wash Temp by turning the Wash Temp knob to the
desired setting.
Always read and follow fabric-care-label instructions to
avoid damage to your items.
All rinses are cold.
9. Select cycle options, if desired
Select the number of rinses by turning the Rinse Options
knob to the desired setting.
IMPORTANT: The Rinse Options knob must be set to an
option "with Fabric Softener" when using the fabric softener
dispenser. This ensures that fabric softener is added at the
correct time in the rinse for even distribution.
Set the Water Level knob to the Auto Sensing setting and
the washer will automatically sense the appropriate water
level for the load size and type.
Set the Water Level knob to the Deep Water Wash setting
and the washer will ll to the maximum water level.
Note: The cycle will be longer due to extended ll times
when using the Deep Water Wash setting.
10. Press START/Pause
to begin wash cycle
Press the START/Pause button to start the wash cycle. When
the cycle has nished, the Done indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and prevent rusting of metal hooks, zippers,
and snaps.
Adding garment(s)
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause. The lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Add garments, close lid, and
press START/Pause again to restart the cycle.
NOTE: Washer will not ll with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes, the
water will pump out automatically.
Manual Soak
If you would like to manually soak your garments at any time
during the wash portion of the cycle, press START/Pause
and leave the lid closed. Once your desired soak time has
elapsed, press START/Pause again to continue the cycle. As
long as the lid remains closed, your soak time can be longer
than 10 minutes. However, if the lid is opened during the soak
and remains open for more than 10 minutes, the water will
pump out automatically.
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents. Cool is slightly warmer
than cold.
Dark colors that
bleed or fade
Light soils
Hot
Some cold water is added to save
energy. This will be cooler than
your hot-water-heater setting.
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Whites and pastels
Durable items
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Tap Cold
This is the temperature from your
faucet.
7. Select SOIL LEVEL
Once you select a cycle, select the soil level by turning the
Soil Level knob to the desired setting.