Owner's Manual
9
3. Place the next bottle on the rack with the neck of the
bottle facing the back of the Beverage Center.
Alternate the direction of the bottles, in this manner, until
the rack is full.
4. Slide the wine
rack into place.
NOTE: The wine rack can be stocked with the bottles
facing either direction, however, to optimize storage
adjacent bottles should be facing in opposite directions.
Bottom Rack 6 Bottles
Bottom Wine Rack:
Starting from left-hand side of the bottom rack, place the
first bottle with the neck of the bottle facing the front of the
Beverage Center. Continues to place the remaining bottles
facing in the same direction.
Cleaning
BEVERAGE CENTER CARE
Clean the Beverage Center about once a month to avoid
buildup of odors. Wipe up spills immediately.
To clean your Beverage Center:
1. Unplug Beverage Center or disconnect power.
2. Remove all removable parts from inside, such as
shelves, etc.
3. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth
and a mild detergent in warm water.
• Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning
Explosion Hazard
Risk of fire or explosion.
Flammable refrigerant used.
Do not use mechanical devices to defrost
refrigerator.
Do not puncture refrigerant tubing.
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior
and door liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools.
These can scratch or damage materials.
• To help remove odors, you can wash interior walls with
a mixture of warm water and baking soda (2 tbs to 1 qt
(26 g to 0.95 L) of water).
4. Wash stainless steel and painted metal exteriors with a
clean sponge or soft cloth and a mild detergent in warm
water. Do not use abrasive or harsh cleaners, or
cleaners containing chlorine. These can scratch or
damage materials. Dry thoroughly with a soft cloth.
5. Replace the removable parts.
Condenser cleaning:
Explosion Hazard
Risk of fire or explosion due to puncture of
refrigerant tubing.
Follow handling instructions carefully.
Flammable refrigerant used.
1. Remove the base grille. See “Base Grille”.