Owner's Manual

11
Replacing the LED Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect power.
2. Remove the grease filters from the hood.
3. Remove the fused light bulb from behind the lamp spacer.
4. Screw a 120V, 9W maximum, LED light bulb with
E26 base into the socket.
5. Replace the grease filters.
6. Reconnect power.
If the new light does not operate, make sure the light bulb is
inserted correctly before calling service.
WIRING DIAGRAM
BK
For ADA compliance add these elements
during the installation
Remote Switch
Light Switch
Off - On
C25
SEL0157858A
L
G
Ground
Screw
For supply connection
use wires suitable for
at least 75° (167°F)
L
N
E26
LED BULB
BK
WH
BK
BR
BK
RD
BR
WH
RD
WH
WH
BK
Speed 2 Common
WH
Speed 1
RD
Motor Switch
Low - Off - High
Motor characterstics
Power absorption
Current
Frequency
Power Supply
Motor resistance (ohms)
White - Black
White - Red
73 ±10% W
1.2 ±10%A
60Hz
120VAC
13.6 ±10% Ohms
17.1 ±10% Ohms
BK