Instructions for use WASHING MACHINE Contents GB English,1 CZ Česky,43 FR Français,15 GR Ελληνικά,57 NL Nederlands,29 GB Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Care and maintenance, 4 Cutting off the water and electricity supplies Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 5
Installation GB ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/ herself with its operation and features. ! Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. Unpacking and levelling Unpacking 1.
Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a drainage duct or a wall drain located at a height between 65 and 100 cm from the floor; alternatively, rest it on the side of a washbasin or bathtub, fastening the duct supplied to the tap (see figure). The free end of the hose should not be underwater. ! Do not use extension cords or multiple sockets. ! The cable should not be bent or compressed.
Care and maintenance GB Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. • Unplug the washing machine when cleaning it and during all maintenance work. Cleaning the washing machine • The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Precautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. General safety • This appliance was designed for domestic use only.
Description of the washing machine GB Control panel START/PAUSE button and indicator light ON/OFF button TEMPERATURE button DISPLAY WASH CYCLE Detergent dispenser drawer SELECTOR KNOB PUSH & WASH SPIN button DELAYED START button OPTION buttons button Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”). DELAYED START button: press to set a delayed start for the selected wash cycle; the delay period appears on the display.
Display GB B A C C The display is useful when programming the machine and provides a great deal of information. The duration of the available wash cycles and the remaining time of a running cycle appear in section A; if the DELAYED START option has been set, the countdown to the start of the selected wash cycle will appear.
Running a wash cycle GB Rapid programming 1. LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure you do not exceed the maximum load value indicated in the table of programmes and wash cycles on the following page. 2. ADD THE DETERGENT. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “Detergents and laundry”. 3. CLOSE THE DOOR. 4. Press the “PUSH & WASH” button to start the wash programme. Traditional programming 1.
Wash cycles and options Max. load (kg) 12 13 14 14 14 Cycle duration Bleach 10 Synthetic: heavily soiled resistant colours. 10 Synthetic (3): lightly soiled resistant colours. 11 Coloured Total water lt Fabric softener 600 800 1000 1000 0 800 1000 - - 5 5 3,5 3,5 1 2 3,5 90° 60° 40° 40° (Max.
GB Push & Wash This function allows for starting a wash cycle even when the machine is switched off without having to press the ON/OFF button in advance, or after switching on the machine, without having activated any button and/or selector (otherwise, the Push & Wash function will be deactivated). To start the Push & Wash cycle press and hold the relative button for 2 seconds. The lit indicator light indicates that the cycle has started.
Detergents and laundry Detergent dispenser drawer Special wash cycles Successful washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. ! Do not use hand washing detergents because these create too much foam. ! Use powder detergent for white cotton garments, for prewashing, and for washing at temperatures over 60°C.
GB Cotton 20°C (programme 12) ideal for lightly soiled cotton loads. The effective performance levels achieved at cold temperatures, which are comparable to washing at 40°, are guaranteed by a mechanical action which operates at varying speed, with repeated and frequent peaks. Eco Synthetic 20°C (programme 13) ideal for mixed loads (cotton and synthetics) with a normal soil level.
Troubleshooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be solved easily using the following list. GB Problem: Possible causes / Solutions: The washing machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. • There is no power in the house. The wash cycle does not start.
Service GB Before contacting the Technical Assistance Service: • Check whether you can solve the problem alone (see “Troubleshooting”). • Restart the wash cycle to check whether the problem has been solved. • If this is not the case, contact an authorised Technical Assistance Centre. ! Always request the assistance of authorised technicians. Have the following information to hand: • the type of problem; • the appliance model (Mod.); • the serial number (S/N).
Mode d’emploi LAVE-LINGE Sommaire FR Français FR Installation, 16-17 Déballage et mise à niveau Raccordements eau et électricité Premier cycle de lavage Caractéristiques techniques Entretien et soin, 18 Coupure de l’arrivée d’eau et du courant Nettoyage du lave-linge Nettoyage du tiroir à produits lessiviels Entretien du hublot et du tambour Nettoyage de la pompe Contrôle du tuyau d’arrivée de l’eau Précautions et conseils, 19 Sécurité générale Mise au rebut Ouverture manuelle de la porte hublot XWE 81
Installation FR ! Conserver ce mode d’emploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, veiller à ce qu’il suive toujours le lave-linge pour que son nouveau propriétaire soit informé sur son mode de optionnement et puisse profiter des conseils correspondants. ! Lire attentivement les instructions: elles fournissent des conseils importants sur l’installation, l’utilisation et la sécurité de l’appareil. Déballage et mise à niveau Déballage 1.
Raccordement du tuyau de vidange 65 - 100 cm ! N’utiliser ni rallonges ni prises multiples. FR Raccorder le tuyau d’évacuation, sans le plier, à un conduit d’évacuation ou à une évacuation murale placés à une distance du sol comprise entre 65 et 100 cm ; ! Le câble ne doit être ni plié ni trop écrasé. ou bien l’accrocher à un évier ou à une baignoire, dans ce cas, fixer le support en plastique fourni avec l’appareil au robinet (voir figure).
Entretien et soin FR Coupure de l’arrivée d’eau et du courant • Fermer le robinet de l’eau après chaque lavage. Cela réduit l’usure de l’installation hydraulique du lave-linge et évite tout danger de fuites. • Débrancher la fiche de la prise de courant lors de tout nettoyage du lave-linge et pendant tous les travaux d’entretien. Nettoyage du lave-linge • Pour nettoyer l’extérieur et les parties en caoutchouc, utiliser un chiffon imbibé d’eau tiède et de savon. N’utiliser ni solvants ni abrasifs.
Précautions et conseils ! Ce lave-linge a été conçu et fabriqué conformément aux normes internationales de sécurité. Ces consignes sont fournies pour des raisons de sécurité, il faut les lire attentivement. Sécurité générale • Cet appareil est conçu pour un usage domestique.
Description du lave-linge FR Bandeau de commandes Touche et voyant START/PAUSE Touche TEMPÉRATURE Touche ON/OFF ECRAN Touche Tiroir à produits lessiviels BOUTON PROGRAMMES Touche Touche ESSORAGE DÉPART DIFFÉRÉ Touches OPTION PUSH & WASH Tiroir à produits lessiviels : pour charger les produits lessiviels et les additifs (voir “Produits lessiviels et linge”). Touche ON/OFF : appuyer brièvement sur la touche pour allumer ou éteindre l’appareil.
Ecran B FR A C C L’écran est utile pour programmer la machine et fournit de multiples renseignements. La section A affiche la durée des différents programmes disponibles et, une fois le cycle lancé, le temps restant jusqu’à la fin du programme ; si un DÉPART DIFFÉRÉ a été sélectionné, le temps restant avant le démarrage du programme sélectionné est affiché.
Comment faire un cycle de lavage FR Programmation rapide 1. CHARGER LE LINGE. Ouvrir la porte hublot. Charger le linge en faisant attention à ne pas dépasser la quantité indiquée dans le tableau des programmes de la page suivante. 2. DOSER LE PRODUIT LESSIVIEL. Sortir le tiroir et placer le produit lessiviel dans les bacs correspondants comme indiqué au paragraphe “Produits lessiviels et linge”. 3. FERMER LE HUBLOT. 4. Appuyer sur la touche « PUSH & WASH » pour lancer le programme de lavage.
Programmes et options Durée cycle Essorage + Vidange Eau totale (lt) Eco & Rapid Coton 20°C: blancs et couleurs résistantes peu sales. Eco Synthétiques 20°C Rapide Rapide Rapide Fonctions Rinçage/Blanchiment Consommation d’énergie (kWh) 12 13 14 14 14 Humidité résiduelle (%) 9 Coton: blancs et couleurs résistantes peu sales. 10 Synthétiques: couleurs résistantes très sales. 10 Synthétiques (3): couleurs résistantes peu sales.
FR Push & Wash Cette fonction permet de lancer un cycle de lavage même si la machine est éteinte sans qu’il faille préalablement appuyer sur la touche ON/OFF ou, après allumage de la machine, sans avoir besoin d’activer aucune autre touche et/ou bouton (autrement le programme Push & Wash sera désactivé). Pour lancer le cycle Push & Wash appuyer 2 secondes de suite sur la touche. L’allumage du voyant signale que le cycle est lancé.
Produits lessiviels et linge Tiroir à produits lessiviels Programmes spéciaux Un bon résultat de lavage dépend aussi d’un bon dosage de produit lessiviel : un excès de lessive ne lave pas mieux, il incruste l’intérieur du lave-linge et pollue l’environnement. ! Ne pas utiliser de lessives pour lavage à la main, elles moussent trop. ! Utiliser des lessives en poudre pour du linge en coton blanc et en cas de prélavage et de lavages à une température supérieure à 60°C.
FR Couleurs: utiliser le programme 11 pour le lavage de textiles de couleur claire. Ce programme est conçu pour préserver l’éclat des couleurs au fil des lavages. Coton 20°C (programme 12) idéal pour des charges de linge sale en coton. Les bonnes performances, même à froid, comparables à celles d’un lavage à 40°, sont assurées grâce à une action mécanique qui brasse en variant la vitesse et avec des pics répétés et rapprochés.
Anomalies et remèdes Il peut arriver que le lave-linge ne fonctionne pas bien. Avant d’appeler le Service de dépannage (voir “Assistance”), contrôler s’il ne s’agit pas par hasard d’un problème facile à résoudre à l’aide de la liste suivante. Anomalies : Causes / Solutions possibles : Le lave-linge ne s’allume pas. • La fiche n fest pas branchée dans la prise de courant ou mal branchée. • Il y a une coupure de courant. Le cycle de lavage ne démarre pas.
Assistance FR Avant d’appeler le service d’Assistance technique : • Vérifier s’il est possible de résoudre l’anomalie par ses propres moyens (voir “Anomalies et Remèdes”); • Remettre le programme en marche pour contrôler si l’inconvénient a disparu ; • Si ce n’est pas le cas, contacter un Centre de dépannage. ! Ne jamais s’adresser à des techniciens non agréés. Communiquer : • le type de panne ; • le modèle de l’appareil (Mod.) ; • le numéro de série (S/N).
Gebruiksaanwijzing WASAUTOMAAT Inhoud NL Installatie, 30-31 NL Nederlands Uitpakken en waterpas zetten Hydraulische en elektrische aansluitingen Eerste wascyclus Technische gegevens Onderhoud en verzorging, 32 Afsluiten van water en stroom Reinigen van de wasautomaat Reinigen van het wasmiddelbakje Onderhoud van deur en trommel Reinigen van de pomp Controle van de buis van de watertoevoer Voorzorgsmaatregelen en advies, 33 Algemene veiligheid Afvalverwijdering Handmatige opening van het deurtje XWE 81
Installatie NL ! Het is belangrijk deze handleiding te bewaren voor latere raadpleging. In het geval u het apparaat verkoopt, of u verhuist, moet het boekje bij de wasautomaat blijven zodat de nieuwe gebruiker de functies en betreffende raadgevingen kan doornemen. ! Lees de instructies aandachtig door: u vindt er belangrijke informatie betreffende installatie, gebruik en veiligheid. Uitpakken en waterpas zetten Uitpakken 1. De wasautomaat uitpakken. 2.
Aansluiting van de afvoerbuis 65 - 100 cm Verbind de buis, zonder hem te buigen, aan een afvoerleiding of aan een afvoer in de muur tussen de 65 en 100 cm van de grond af; ! Het snoer mag niet gebogen of samengedrukt worden. NL ! De voedingskabel mag alleen door een bevoegde installateur worden vervangen. Belangrijk! De fabrikant kan niet aansprakelijk worden gesteld wanneer deze normen niet worden nageleefd.
Onderhoud en verzorging NL Afsluiten van water en stroom • Sluit na iedere wasbeurt de kraan af. Hiermee beperkt u slijtage van de waterinstallatie van de wasmachine en voorkomt u lekkage. • Sluit altijd eerst de stroom af voordat u de wasautomaat gaat schoonmaken en gedurende onderhoudswerkzaamheden. Reinigen van de wasautomaat • De buitenkant en de rubberen onderdelen kunnen met een spons en een lauw sopje worden schoongemaakt. Gebruik nooit schuurmiddelen of oplosmiddelen.
Voorzorgsmaatregelen en advies ! De wasmachine is ontworpen en geproduceerd volgens de internationale veiligheidsnormen. Deze aanwijzingen zijn voor uw eigen veiligheid geschreven en moeten aandachtig worden doorgenomen. Algemene veiligheid • Dit apparaat is uitsluitend ontworpen voor huishoudelijk niet-professioneel gebruik.
Beschrijving van de wasautomaat NL Bedieningspaneel Knop en controlelampje START/PAUSE Knop ON/OFF Knop TEMPERATUUR DISPLAY Knop DRAAIKNOP Knop PROGRAMMA’S CENTRIFUGE Wasmiddelbakje UITGESTELDE START Knoppen OPTIE Knop PUSH & WASH Wasmiddelbakje: voor wasmiddelen en wasversterkers (zie “Wasmiddelen en wasgoed”). Knop ON/OFF : druk even op de toets om de wasautomaat aan of uit te zetten. Het groen START/ PAUSE controlelampje dat langzaam knippert geeft aan dat de wasautomaat aanstaat.
Display B NL A C C Het display is nodig om de wasautomaat te programmeren en geeft meerdere soorten informatie. In de sectie A verschijnt de duur van de beschikbare programma’s en, als de cyclus is gestart, de resterende tijd tot het einde ervan. Indien een UITGESTELDE START is geselecteerd verschijnt de resterende tijd tot aan de start van het geselecteerde wasprogramma.
Het uitvoeren van een wascyclus NL Snelle programmering 1. HET WASGOED INLADEN. Open de deur. Laad het wasgoed in en zorg ervoor nooit de laadhoeveelheid te overschrijden aangegeven in de programmatabel op de volgende bladzijde. 2. WASMIDDEL DOSEREN.Trek het bakje naar buiten en doe het wasmiddel in de speciale bakjes, zoals aangegeven in “Wasmiddelen en wasgoed”. 3. SLUIT DE DEUR. 4. Druk op de toets “PUSH & WASH” om het wasprogramma te starten. Traditionele programmering 1. DE WASAUTOMAAT AANZETTEN.
Programma’s en opties Voorwas Wassen Wasverzachter Bleken Maximale lading (kg) Overgebleven vochtigheid % Energieverbruik kWh Totaal water lt Duur cyclus Programma’s Programmatabel 30° 30° 60° 40° 30° 40° 30° 600 800 1000 1000 0 800 1000 - - 5 5 3,5 3,5 1 2 3,5 - - - ** ** ** ** ** ** ** 90° 60° 40° 40° (Max.
NL Push & Wash Met deze functie kunt u een wascyclus starten terwijl de wasautomaat uit is, zonder dat u daarvoor op de toets ON/OFF hoeft te drukken of, nadien als u de wasautomaat aanzet, zonder dat u andere toetsen en/of knoppen in hoeft te drukken (als u dit niet doet zal het programma Push & Wash worden uitgeschakeld). Om de Push & Wash cyclus te starten houdt u de knop 2 seconden lang ingedrukt. Het controlelampje geeft aan dat de cyclus is gestart.
Wasmiddelen en wasgoed Wasmiddelbakje Speciale programma’s Een goed wasresultaat hangt ook af van de juiste dosis wasmiddel: te veel wasmiddel maakt het wassen niet beter. Het wasmiddel blijft aan de binnenzijde van de wasautomaat zitten en zorgt voor het vervuilen van het milieu. ! Gebruik nooit wasmiddelen voor handwas aangezien die te veel schuim vormen. ! Gebruik waspoeder voor witte katoenen was, voor de voorwas en voor het wassen op temperaturen van meer dan 60°C.
NL Gekleurd: gebruik de programma 11 voor het wassen van licht gekleurde was. Het programma is ontwikkeld voor het langdurige behoud van de mooie kleuren van uw wasgoed. Katoen 20°C (programma 12) Katoen ideaal voor een lading vuil katoen. De optimale prestaties, zelf met koud water, die kunnen worden vergeleken met een wascyclus op 40°C, worden gegarandeerd door een mechanische werking die de snelheid varieert met herhaaldelijke en zeer dicht op elkaar liggende piekvariaties.
Storingen en oplossingen Het kan gebeuren dat de wasautomaat niet werkt. Voor u contact opneemt met de Servicedienst (zie “Service”) moet u controleren of het niet een storing betreft die u zelf makkelijk kunt verhelpen met behulp van de volgende lijst. NL Storingen: Mogelijke oorzaken / Oplossing: De wasautomaat gaat niet aan. • De stekker zit niet in het stopcontact of niet ver genoeg om contact te maken. • Het hele huis zit zonder stroom. De wascyclus start niet.
Service NL Voordat u de Servicedienst inschakelt: • Controleer eerst of u het probleem zelf kunt oplossen (zie “Storingen en oplossingen”). • Start het programma opnieuw om te controleren of de storing is verholpen; • Neem indien dit niet helpt contact op met de servicedienst. ! Wendt u nooit tot een niet erkende installateur. Comunicare: • het type storing; • het model wasautomaat (Mod.); • het serienummer (S/N).
Návod k použití PRAČKA Obsah CZ Česky CZ Instalace, 44-45 Rozbalení a vyrovnání do vodorovné polohy Připojení k elektrické a k vodovodní síti První prací cyklus Technické údaje Údržba a péče, 46 Uzavření přívodu vody a vypnutí elektrického napájení Čištění pračky Čištění dávkovače pracích prostředků Péče o dvířka a buben Čištění čerpadla Kontrola přítokové hadice na vodu Opatření a rady, 47 Základní bezpečnostní pokyny Likvidace Manuální otevření dvířek XWE 81484 Popis pračky, 48-49 Ovládací panel
Instalace CZ ! Je důležité uschovat tento návod tak, abyste jej mohli kdykoli konzultovat. V případě prodeje, darování nebo přestěhování pračky se ujistěte, že zůstane uložen v blízkosti pračky, aby mohl posloužit novému majiteli při seznámení s její činností a s příslušnými upozorněními. ! Pozorně si přečtěte uvedené pokyny: Obsahují důležité informace týkající se instalace, použití a bezpečnosti při práci. Rozbalení a vyrovnání do vodorovné polohy Rozbalení 1. Rozbalte pračku. 2.
Připojení vypouštěcí hadice 65 - 100 cm Připojte vypouštěcí hadici k odpadovému potrubí nebo k odpadu ve stěně, který se nachází od 65 do 100 cm nad zemí; zamezte jejímu ohybu nebo ji uchyťte k okraji umývadla či vany a připevněte ji ke kohoutu prostřednictvím držáku z příslušenství (viz obrázek). Volný konec vypouštěcí hadice nesmí zůstat ponořený do vody.
Údržba a péče CZ Uzavření přívodu vody a vypnutí elektrického napájení • Po každém praní uzavřete přívod vody. Tímto způsobem dochází k omezení opotřebení pračky a ke snížení nebezpečí úniku vody. • Před zahájením čištění pračky a během operací údržby vytáhněte zástrčku napájecího kabelu z elektrické zásuvky. Čištění pračky • Vnější části a části z gumy se mohou čistit hadrem navlhčeným ve vlažné vodě a saponátu. Nepoužívejte rozpouštědla ani abrazivní látky.
Opatření a rady ! Pračka byla navržena a vyrobena v souladu s platnými mezinárodními bezpečnostním předpisy. Tato upozornění jsou uváděna z bezpečnostních důvodů a je třeba si je pozorně přečíst. Základní bezpečnostní pokyny • Toto zařízení bylo navrženo výhradně pro použití v domácnosti.
Popis pračky CZ Ovládací panel Tlačítko a kontrolka START/PAUSE Tlačítko ON/OFF Tlačítko TEPLOTA DISPLEJ Dávkovač pracích prostředků Tlačítko OTOČNÝ OVLADAČ PROGRAMŮ PUSH & WASH Dávkovač pracích prostředků: slouží k dávkování pracích prostředků a přídavných prostředků (viz “Prací prostředky a prádlo”). Tlačítko ON/OFF : Zapněte nebo vypněte pračku krátkým stisknutím tlačítka. Kontrolka START/PAUSE pomalu blikající zeleným světlem poukazuje na to, že je zařízené zapnuté.
Displej CZ B A C C Displej slouží k naprogramování zařízení a poskytuje četné informace. V části A je zobrazována doba trvání různých programů, které jsou k dispozici, a po zahájení cyklu i zbývající doby do jeho ukončení; v případě nastavení ODLOŽENÝ START bude zobrazena doba chybějící do zahájení zvoleného programu. Kromě toho budou při stisknutí příslušného tlačítka zobrazeny maximální hodnoty rychlosti odstřeďování a teploty, kterých zařízení může dosáhnout v závislosti na nastaveném programu.
Jak provést prací cyklus CZ Rychlé nastavení programu 1. NAPLŇTE PRAČKU PRÁDLEM. Otevřete dvířka s průzorem. Naplňte pračku prádlem a dbejte přitom, aby nedošlo k překročení množství náplně, uvedeného v tabulce programů na následující straně. 2. NADÁVKUJTE PRACÍ PROSTŘEDEK. Vytáhněte dávkovač pracích prostředků a naplňte prací prostředek do příslušných přihrádek způsobem vysvětleným v části “Prací prostředky a prádlo”. 3. ZAVŘETE DVÍŘKA. 4. Zahajte prací program stisknutím tlačítka „Push & Wash“.
Programy a volitelné funkce Spotřeba energie (kWh) Celkové množství vody (lt) Doba trvání cyklu Zbytková vlhkost (%) 8 53 0,97 55 215’ - 8 53 0,87 92 185’ - 8 - 4,5 4,5 8 46 1,10 - 65 120’ ** ** - - 8 8 1,5 3,5 8 80 - 0,19 - 46 - 1400 - - 8 - - - - 1400 - - - - 8 - - - - OFF - - - - 8 - - - Praní Bělicí prostředek Max. náplň (kg) ** - 8 1400 60° 1400 - 40° 40° (Max.
CZ Push & Wash Tato funkce umožňuje zahájit prací cyklus i při vypnutém zařízení, aniž by bylo třeba nejdříve stisknout tlačítko ON/OFF nebo následně, při zapnutí zařízení, bez použití jakéhokoli dalšího tlačítka a/nebo otočného ovladače (v opačném případě bude program Push & Wash zrušen). Za účelem zahájení cyklu Push & Wash držte stisknuté tlačítko po dobu 2 sekund. Rozsvícená kontrolka poukazuje na to, že cyklus byl zahájen.
Prací prostředky a prádlo Dávkovač pracích prostředků Dobrý výsledek praní závisí také na správném dávkování pracího prostředku: použití jeho nadměrného množství snižuje efektivitu praní a napomáhá tvorbě vodního kamene na vnitřních částech pračky a zvyšuje znečištění životního prostředí. ! Nepoužívejte prací prostředky určené pro ruční praní, protože způsobují tvorbu nadměrného množství pěny. ! Pro předpírku a praní při teplotě vyšší než 60 °C používejte práškové prací prostředky pro bílé bavlněné prádlo.
CZ Bavlna 20°C (program 12) ideální pro náplně ze znečištěné bavlny. Dobrá výkonnost i za studena, srovnatelná s praním při 40 °C, je zaručena mechanickým působením, které je založeno na změně rychlosti v krátkých nebo dlouhých intervalech. Eco Syntetické 20°C (program 13)ideální pro smíšené náplně (bavlna a syntetika), tvořené středně znečištěným prádlem. Dobrá výkonnost praní i za studena je zaručena mechanickým působením, které je založeno na změně rychlosti ve středních nebo určených intervalech.
Poruchy a způsob jejich odstranění Může se stát, že pračka nebude fungovat. Dříve, než zatelefonujete na Servisní službu (viz “Servisní služba”), zkontrolujte, zda se nejedná o problém, který lze snadno vyřešit s pomocí následujícího seznamu. Poruchy: Možné příčiny / Způsob jejich odstranění: Pračku nelze zapnout. • Zástrčka není zasunuta v zásuvce nebo není zasunuta natolik, aby došlo ke spojení kontaktů. • V celém domě je vypnutý proud. Nedochází k zahájení pracího cyklu.
Servisní služba CZ Před přivoláním Servisní služby: • Zkontrolujte, zda nejste schopni poruchu odstranit sami (viz “Poruchy a způsob jejich odstranění”); • Znovu uveďte do chodu prací program, abyste ověřili, zda byla porucha odstraněna; • V záporném případě se obraťte na středisko servisní služby. ! Nikdy se neobracejte s žádostí o pomoc na techniky, kteří nejsou k výkonu této činnosti oprávněni. Při hlášení poruchy uveďte: • druh poruchy; • model zařízení (Mod.); • výrobní číslo (S/N).
Οδηγίες χρήσης ΠΛΥΝΤΗΡΙΟ Περιεχόμενα GR Εγκατάσταση, 58-59 GR Ελληνικά Αποσυσκευασία και οριζοντίωση Υδραυλικές και ηλεκτρικές συνδέσεις Πρώτος κύκλος πλυσίματος Τεχνικά στοιχεία Συντήρηση και φροντίδα, 60 Αποκλεισμός νερού και ηλεκτρικού ρεύματος Καθαρισμός του πλυντηρίου Καθαρισμός του συρταριού απορρυπαντικών Φροντίδα της πόρτας και του κάδου Καθαρισμός της αντλίας Έλεγχος του σωλήνα τροφοδοσίας του νερού Προφυλάξεις και συμβουλές, 61 Γενική ασφάλεια Διάθεση Χειρονακτικό άνοιγμα της πόρτας XWE 814
Εγκατάσταση GR ! Είναι σημαντικό να διατηρήσετε το εγχειρίδιο αυτό για να μπορείτε να το συμβουλεύεστε οποιαδήποτε στιγμή. Σε περίπτωση πώλησης, παραχώρησης ή μετακόμισης, βεβαιωθείτε ότι παραμένει μαζί με το πλυντήριο για να πληροφορεί τον νέο ιδιοκτήτη για τη λειτουργία και τις σχετικές προειδοποιήσεις. ! Διαβάστε προσεκτικά τις οδηγίες: υπάρχουν σημαντικές πληροφορίες για την εγκατάσταση, τη χρήση και την ασφάλεια.
Σύνδεση του σωλήνα αδειάσματος 65 - 100 cm Συνδέστε το σωλήνα αδειάσματος, χωρίς να τον διπλώσετε, σε μια σωλήνωση αδειάσματος ή σε μ ι α π α ρ οχ έ τ ε υ σ η επιτοίχια σε ύψος από το έδαφος μεταξύ 65 και 100 cm. Ή στηρίξτε τον στο χείλος ενός νιπτήρα ή μιας λεκάνης, δένοντας τον οδηγό που σας παρέχεται στον κρουνό (βλέπε εικόνα). Το ελεύθερο άκρο του σωλήνα αδειάσματος δεν πρέπει να παραμένει βυθισμένο στο νερό. ! Το καλώδιο τροφοδοσίας πρέπει να αντικαθίσταται μόνο από εξουσιοδοτημένους τεχνικούς.
Συντήρηση και φροντίδα GR Αποκλεισμός νερού και ηλεκτρικού ρεύματος • Κλείνετε τον κρουνό του νερού μετά από κάθε πλύσιμο. Έτσι περιορίζεται η φθορά της υδραυλικής εγκατάστασης του πλυντηρίου και αποσοβείται ο κίνδυνος απωλειών. • Να βγάζετε το βύσμα από το ρεύμα όταν καθαρίζετε το μηχάνημα και κατά τις εργασίες συντήρησης. Καθαρισμός του πλυντηρίου • Το εξωτερικό μέρος και τα λαστιχένια μέρη μπορούν να καθαρίζονται με ένα πανί βρεγμένο με χλιαρό νερό και σαπούνι. Μη χρησιμοποιείτε διαλύτες ή αποξυστικά.
Προφυλάξεις και συμβουλές ! Το πλυντήριο σχεδιάστηκε και κατασκευάστηκε σύμφωνα με τους διεθνείς κανόνες ασφαλείας. Αυτές οι προειδοποιήσεις παρέχονται για λόγους ασφαλείας και πρέπει να διαβάζονται προσεκτικά. Γενική ασφάλεια • Η συσκευή αυτή σχεδιάστηκε αποκλειστικά για οικιακή χρήση.
Περιγραφή του πλυντηρίου GR Πίνακας ελέγχου Κουμπί και ενδεικτικό φωτάκι START/PAUSE Κουμπί ΘΕΡΜΟΚΡΑΣΙΑΣ Κουμπί ON/OFF ΟΘΌΝΗ Θήκη απορρυπαντικών ΕΠΙΛΟΓΈΑΣ ΠΡΟΓΡΑΜΜΆΤΩΝ Κουμπί PUSH & WASH Θήκη απορρυπαντικών: για την προσθήκη απορρυπαντικών και πρόσθετων (βλέπε «Απορρυπαντικά και μπουγάδα»). Κουμπί ON/OFF : πιέστε για λίγο το κουμπί για να ανάψετε ή να σβήσετε τη μηχανή. Το ενδεικτικό φωτάκι START/PAUSE πράσινου χρώματος που αναβοσβήνει αργά δείχνει ότι η μηχανή είναι αναμμένη.
ΟΘΌΝΗ B GR A C C Η οθόνη είναι χρήσιμη για τον προγραμματσισμό της μηχανής και παρέχει πολλαπλές πληροφορίες. Στην ενότητα A απεικονίζεται η διάρκεια των διαφόρων διαθέσιμων προγραμμάτων και αφού έχει εκκινηθεί ο κύκλος, του υπολειπόμενου χρόνου για το τέλος αυτού. Στην περίπτωση που έχει τεθεί μια ΚΑΘΥΣΤΕΡΗΜΕΝΗ ΕΚΚΙΝΗΣΗ, απεικονίζεται ο χρόνος που υπολείπεται στην εκκίνηση του επιλεγμένου προγράμματος.
Πως διενεργείται ένας κύκλος πλυσίματος GR Ταχύς προγραμματισμός 1. ΦΟΡΤΩΣΗ ΡΟΥΧΩΝ. Ανοίξτε την πόρτα. Φορτώστε τα ρούχα, προσέχοντας να μην ξεπεράσετε την ποσότητα φορτίου που υποδεικνύεται στον πίνακα προγραμμάτων της επόμενης σελίδας. 2. ΔΟΣΟΛΟΓΙΑ ΤΟΥ ΑΠΟΡΡΥΠΑΝΤΙΚΟΥ. Βγάλτε το συρτάρι και χύστε το απορρυπαντικό στις αντίστοιχες λεκανίτσες όπως εξηγείται στην “Απορρυπαντικά και μπουγάδα”. 3. ΚΛΕΙΣΤΕ ΤΗΝ ΠΟΡΤΑ. 4. ΠΑΤΗΣΤΕ ΤΟ ΚΟΥΜΠΙ “PUSH & WASH” για την εκκίνηση του προγράμματος πλύσης.
Προγράμματα και δυνατότητες Μέγιστο Φορτίο. (Kg) Υπολειπόμενη υγρασία % Κατανάλωση ενέργειας kWh Συνολικό νερό lt Διάρκεια κύκλου - - ** ** ** ** ** ** ** - - - ** Λευκαντικό - ΠλυςΙμο 5 5 3,5 3,5 1 2 3,5 Μέγιστη θερμοκρ.
GR Push & Wash Η λειτουργία αυτή επιτρέπει την εκκίνηση ενός κύκλου πλυσίματος και με τη μηχανή σβηστή χωρίς να χρειαστεί εκ των προτέρων να πατήσετε το κουμπί ON/OFF ή, μετά το άναμμα της μηχανής, χωρίς να έχετε ενεργοποιήσει κανένα κουμπί ή/και διακόπτη (αλλιώς το πρόγραμμα Push & Wash θα απενεργοποιηθεί). Για την εκκίνηση του κύκλου Push & Wash κρατήστε πατημένο το κουμπί για 2 δευτερόλεπτα. Το αναμμένο ενδεικτικό φωτάκι δείχνει ότι ο κύκλος έχει ξεκινήσει.
Απορρυπαντικά και μπουγάδα Θήκη απορρυπαντικών Το καλό αποτέλεσμα του πλυσίματος εξαρτάται επίσης και από τη σωστή δοσολογία του απορρυπαντικού: υπερβάλλοντας δεν πλένουμε αποτελεσματικότερα και συντελούμε στη δημιουργία κρούστας στα εσωτερικά μέρη του πλυντηρίου και στη μόλυνση του περιβάλλοντος. ! Μη χρησιμοποιείτε απορρυπαντικά για πλύσιμο στο χέρι, διότι παράγουν πολύ αφρό.
GR Χρωματιστά: χρησιμοποιήστε τον κύκλο 11 για το πλύσιμο ανοιχτόχρωμων ρούχων. Το πρόγραμμα μελετήθηκε για τη διατήρηση της ζωντάνιας των χρωμάτων στο χρόνο. βαμβακερά 20°C (πρόγραμμα 12): ιδανικό για φορτία λερωμένων βαμβακερών. Οι καλές επιδόσεις και σε χαμηλή θερμοκρασία, συγκρίσιμες με ένα πλύσιμο στους 40°, εξασφαλίζονται από μια μηχανική δράση που λειτουργεί με μεταβολή ταχύτητας σε επαναλαμβανόμενες και κοντινές αυξομειώσεις.
Ανωμαλίες και λύσεις Μπορεί να συμβεί το πλυντήριο να μη λειτουργεί. Πριν τηλεφωνήσετε στην Υποστήριξη( βλέπε “Υποστήριξη”), ελέγξτε αν δεν πρόκειται για πρόβλημα που επιλύεται εύκολα με τη βοήθεια του ακόλουθου καταλόγου. Ανωμαλίες: Δυνατά αίτια / Λύση: Το πλυντήριο δεν ανάβει. • Το βύσμα δεν έχει εισαχθεί στην ηλεκτρική πρίζα ή τουλάχιστον όχι αρκετά για να κάνει επαφή. • Στο σπίτι δεν υπάρχει ρεύμα. Ο κύκλος πλυσίματος δεν ξεκινάει. • • • • • Η πόρτα δεν είναι καλά κλειστή.
Υποστήριξη GR Πριν επικοινωνήσετε με την Υποστήριξη: • Ελέγξτε αν την ανωμαλία μπορείτε να την αντιμετωπίσετε μόνοι σας (βλέπε “Ανωμαλίες και λύσεις”); • Επανεκκινήστε το πρόγραμμα για να ελέγξετε αν το πρόβλημα αντιμετωπίστηκε; • Σε αρνητική περίπτωση, επικοινωνήστε με ένα Κέντρο Τεχνικής Υποστήριξης. ! Μην καταφεύγετε ποτέ σε μη εξουσιοδοτημένους τεχνικούς. Γνωστοποιήστε: • το είδος της ανωμαλίας; • το μοντέλο του μηχανήματος (Mod.); • τον αριθμό σειράς (S/N).
GR 71
195132604.00 03/2015 - Xerox Fabriano GR Indesit Company Spa Viale Aristide Merloni, 47 60044 Fabriano (AN) Italy www.indesit.