Installation guide

Checktheopeningwherethemicrowaveovenwillbeinstalled.

Thelocationmustprovide:

• Minimuminstallationdimensions.See"Installation

Dimensions"illustration,

• Minimumone2"x4"(50.8x101.6mm)woodwallstudand

minimum3/8"(9.5mm)thicknessdrywallorplaster/lathwithin

cabinetopening.

• Supportforweightof150Ibs(68kg),whichincludes

microwaveovenanditemsplacedinsidethemicrowaveoven

anduppercabinet.

• Groundedelectricaloutletinsideuppercabinet.See

"ElectricalRequirements"section.

NOTES:

• If installing the microwave oven near a left sidewall, make sure

there is at least 6" (15.2 cm) of clearance between the wall and

the microwave oven, so that the door can open fully.

• Some cabinet and building materials are not designed to

withstand the heat produced by the microwave oven for

cooking. Check with your builder or cabinet supplier to make

sure that the materials used will not discolor, delaminate or

sustain other damages.

Special Requirements

For Wall Venting Installation Only:

• Cutout must be free of any obstructions so that the vent fits

properly, and the damper blade opens freely and fully.

For Roof Venting Installation Only:

• If you are using a rectangular to round transition piece, the

3" (7.6 cm) clearance needs to exist above the microwave

oven so that the damper blade can open freely and fully. See

"Rectangular to Round Transition" illustration in "Venting

Design Specifications" section.

Installation Dimensions

NOTE: The grounded 3 prong outlet must be inside the upper

cabinet. See "Electrical Requirements" section.

A B

66" (167.6 cm) rain.

A. 2" x 4" wall stud

B. Grounded 3 prong outlet

*30" (76.2 cm) is typical for 66" (167.6 cm) installation height.

Exact dimensions may vary depending on type of range/cooktop

below.

171/4 `'

(43.8 cm)

161/4`'

(41.3 cm)