Installation guide

(,
2. Remove bottom screws (5. Remove screws from door
—
ae
Oe © ®
Remove screws at top, bottom, and side of door (6 screws).
Keep door screws separate from hinge screws as they are
different sizes. Holding door over towel on dryer, grasp sides
of outer door and lift to separate it from inner door.
NOTE: Do not pry apart with putty knife or screwdriver.
Open dryer door. Remove bottom screws from dryer cabinet Do not pull on door seal or plastic door catches.
side of hinges. Loosen (do not remove) top screws from dryer
cabinet side of hinges.
(6. Rotate outer door
( .
3. Lift door off top screws
Rotate outer door 180° and set it back down on inner door.
Be certain to keep cardboard spacer centered between doors.
Reattach outer door panel to inner door panel so handle is on
the side where hinges were just removed. Insert 6 door screws.
( .
7. Flip door over
Lift door until top screws in dryer cabinet are in large part of
hinge slot. Pull door forward off screws. Set door (handle side
up) on top of dryer. Remove top screws from dryer cabinet.
(~ .
4. Remove screws from hinges
ao mC) Flip door over so handle side is down.
Remove screws attaching hinges to door.
17