Litter-Robot 3 Connect Self-Cleaning Litter Box – Grey Manual

7
Toll Free: 877-250-7729 www.Litter-Robot.com
Setting Up Your Litter-Robot
Your Litter-Robot comes fully assembled and ready to use.
Get started by following the steps below.
Placement
 If possible, place the Litter-Robot in the same location as
the old litter box (at least during transition).
 Make sure the unit is on a firm, level surface. Avoid soft,
uneven, or unstable flooring.
 Keep the unit indoors in a cool, dry location. Reduce
exposure to high temperature and humidity.
 Locate the unit near a power outlet. Ensure the unit isn’t
pushed against a wall or into a corner (must not be
touching any walls).
 Place mats or rugs directly in front of, but not under, the
unit. Do not place mats partially under the unit.
Litter
Fill the Globe through the opening with clumping litter until
it meets the raised Fill Line when spread flat (about 8-10
pounds by weight or 1 ½ gallons by volume). Be careful not
to overfill the Globe.
The Litter-Robot litter sifting system requires clumping litter
to work properly. We recommend a high quality clay
clumping litter. Litter beads and crystals that are small
Fill litter to raised Fill Line on
black rubber liner.