Litter-Robot 4 Automatic Litter Box - Manual

www.whiskersuppo.com
17
If your cat re-enters the Globe during the Wait Time countdown (red Light Bar on), the Cat
Sensor(s) detect that your cat has entered and will not cycle with your cat inside (see page
21). Once your cat exits, a new countdown will begin.
Empty Cycle
The Empty cycle allows you to empty all of the lier from the Globe into the Waste Drawer
for easy disposal. Use this cycle to change out the entire lier bed or before cleaning the
Globe (see page 31).
While the Globe is in Home position with the blue Light Bar on, press the Empty buon to sta
an Empty cycle.
During an Empty cycle, press the Cycle, Reset, Empty, or Connect buon to pause the cycle.
Press the Cycle buon to resume the cycle. Press the Reset buon to abo the cycle and
return the Globe to the Home position.
How it works:
1. Upon pressing the Empty buon, the Globe rotates clockwise with the
sequential round robin yellow Light Bar indicating the rotational direction.
2. As the Globe rotates clockwise, lier will fall through the Waste Po and into the
Waste Drawer.
3. Aer the lier is emptied, the Globe pauses with the yellow Light Bar on and awaits
your action. (You may need to sweep any remaining lier toward the Waste Po.)
4. Press the Cycle or Reset buon to return the Globe to the Home position.
IMPORTANT: Supervise and prevent your cat from entering during the Empty Cycle.