Litter-Robot 4 Automatic Litter Box - Manual

www.whiskersuppo.com
24
Sleep Mode
This mode allows you to deactivate the Cat Sensor(s) for a specied period of time, so the
unit will not cycle automatically. Sleep Mode is useful for units located in bedrooms or areas
where you may not want the unit to cycle for a ceain period of the day.
The unit is programmed with a default 8-hour sleep period. This sleep period is repeated
every 24 hours; the sta is determined by the time the mode is initially set.
A 3-second long press of the Cycle buon will enable Sleep Mode. Sleep Mode is indicated
by the Light Bar turning purple. The Light Bar will remain purple during the sleep period and
then return to blue once the sleep period has expired.
During the sleep period the unit will monitor for a cat using the unit, but will not peorm a
Clean cycle. When the sleep period expires, if no usage of the unit was detected, the unit will
change to Ready Mode, indicated by a blue Light Bar, and operate in Automatic Mode for the
remainder of the 24-hour period.
If the unit detects usage during the sleep period, a Clean cycle will be peormed upon the
sleep period expiring. Once the Globe has returned to the Home position, the Light Bar will
change to blue and the unit will operate in Automatic Mode for the remainder of the 24-hour
period.
A 3-second long press of the Cycle buon will disable Sleep Mode, indicated by the Light
Bar changing to blue from purple, or by the Light Bar flashing purple momentarily if the unit is
not in the sleep period.
Note that the Whisker app (see page 26) oers customizable Sleep Mode programming
options.
Wait Time Seing
The Wait Time is the elapsed time staing from when your cat exits the Globe until the unit
stas a Clean cycle. It can be set for 3, 7, 15, 25, or 30 minutes. The default Wait Time is 7
minutes.
Reduce the Wait Time if it is impoant to minimize odor and/or the time that waste is
available to other pets, such as dogs. However, reducing the Wait Time may reduce the
cleaning eectiveness if clumps do not have enough time to set up. Extend the Wait Time
when using a lower-quality clumping lier that needs more time to set up.