Litter-Robot 4 Automatic Litter Box - Manual

www.whiskersuppo.com
29
Waste
Drawer
Liners
Optional Accessories:
Backup Baery
The Lier-Robot can be equipped with a Backup Baery. This sealed 12VDC, 1.3 Amp
Hour baery allows the unit to continue working during power outages. When power to
the Lier-Robot is interrupted, the unit automatically switches to Backup Baery Mode,
indicated by the Control Panel Light Bar changing from full blue to solely the Power buon
LED flashing blue.
Note: WiFi and Night Light functionality will be disabled during Backup Baery Mode
to conserve energy. Light Bar display intensity will be reduced by 50% and Night Light
functionality will be disabled to conserve energy.
The baery pocket and connectors are located in the motor compament of the Base.
Backup Baery Kits can be ordered from lier-robot.com. Note: Use of accessories that
are not sold at lier-robot.com, whisker.com, or any of our authorized resellers’ websites is
not approved or endorsed by Whisker. Whisker is not responsible for accidents or injuries
that occur from use of non-Whisker accessories. Any modications to or unauthorized uses
of your Lier-Robot may void the warranty.
Use and Care
Installing Waste Drawer Liners
The Lier-Robot ships with a Waste Drawer Liner installed. These liners are made specically
for the Lier-Robot, but any 10-13-gallon (37-49L) trash bag will also work.
1. Open a new Waste Drawer Liner or bag.
2. Wrap the edges of the Waste Drawer
Liner or bag over the flange of the Waste
Drawer.
3. Push the remainder of the bag into the
boom of the Waste Drawer and then slide
the Waste Drawer shut.