Installation manual

INSTALLATION SPECIFICATIONS
18 Oktober 2010 / M-SQ20 / 25 / EN
2.3 Installation specifications M-SQ20 / 25
TECHNICAL DATA
Dimensions incl. sound shield. 126 x 68 x 80 cm (L x W x H)
Dimensions w/o. sound shield. 115 x 60 x 75 cm (L x W x H)
Weight incl. sound shield 580 kg
Weight w/o. sound shield 480 kg
Max. operation angle 25°
Remote panel 15 m cable Digital Diesel Control System
Battery capacity min. 120 Ah
Fuel consumption 1 – 6 l/hr, load dependent
Lift fuel pump Mechanical driven; manually priming; lift 1m
Cooling Indirect cooling
Cooling pump WhisperPower self priming impeller pump, PTO driven, type M16
Minimum water supply 20-25 l/min
Alternator synchronous brushless, maintenance free water cooled
Voltage regulation AVR
Output power at power factor cos phi = 1 25kW, 230V or 230/400V 50Hz
Battery charger alternator including regulator (50 Amps)
2.4 Specifications of the accessories
Water scoop 1” = 25,4 mm
Inlet valve 1” in / 25,4 mm out
Water strainer 25,4 mm in, 25,4 mm out
Air vent 25,4 mm
Inlet suction hose 25,4 mm
Fuel filter/water separator 30 micron
Fuel inlet and return 8 mm
Exhaust hose Ø 63 mm inner
Water lock Ø 63 mm
Water/gas separator Ø 63 - 51 - 63 mm
Anti vibration mounts Included, art. nr. 50230552