User's Guide

6
Charge The Camera
1. Connect the supplied USB cord to the micro USB port of
the camera assembly.
2. Plug the USB cable into any standard USB charger with an
output rating of 500ma or higher. The power switch will
illuminate when charging.
3. Charge the camera for 5 to 6 hours. When charging is
complete, illumination of the power switch will turn off.
4. Close USB door securely to ensure waterproof integrity.
GETTING STARTED
Under normal use, the camera maintains a charge with
exposure to sunlight. A battery status indicator is provided on
the monitor when the camera is in use.
NOTE: If vehicle will be stored for periods of time greater
than two months, please turn off camera using the switch
on the rear of the camera to the Off position to prevent the
battery from discharging.
USB door closed USB door opened
Micro USB port