User's Manual

Multi-Site Mode (Motorola and P25)

Some Motorola and P25 system sites are networked

to provide wider coverage, similar to a cellular

network. Like in a phone network coverage area,

their radios automatically use the nearest tower site.

To activate Multi-site mode:

1. Press PGM,

2. Use the 4-direction keypad to navigate to a

talkgroup on the networked multi-site system.

3. Press the EDIT softkey.

4. Press the CURR softkey.

5. Scroll down to the TSYS item and press SEL to

edit the system parameters.

6. Scroll to Multi-Site, and use the four-direction

keypad to select:

• Off – The scanner will use the first usable control

channel in the control channel list.

• Stat – The scanner will track the system using

any usable control channel in the list.

• Roam – The scanner will use only the best

control channel. You can adjust the Threshold

values to improve performance.

7. Press the SAVE softkey.

8. Press the SAVE softkey again.

NOTE: You should experiment with the different

multi-site modes and the threshold settings to find a

combination that works best for your location.