User's Manual

46
To activate SAME standby mode:
1. Press WX. The scanner quickly locates an active
weather radio frequency.
2. When the scanner stops on a frequency, press
the stby softkey. The softkey will change
to STBY, and the scanner will alert when a
matching SAME message is received.
3. To exit SAME Standby Mode, press the STBY
softkey again, or press MAN, SCAN or PGM.
Your scanner will resume SAME Standby operation
90 seconds after the SAME warning starts. You may
reset standby mode by pressing the STBY softkey
twice at any time.