User's Manual

Initializing to Factory Defaults

You can initialize the entire scanner to factory defaults.

This clears all programmed data and global settings.

NOTE: You can save your working memory to a

V-Scanner folder before performing this operation.

V-Scanner memory is not affected by this procedure.

To initialize to factory defaults:

1. Turn off the scanner, then turn it on again.

2. When the Welcome/Ownerscreen appears,

press 0. The scanner displays:

3. Press 1. The scanner displays:

4. Press ENT. The scanner displays:

5. Press any key to proceed. The scanner reboots

with file system and global parameters reset to

factory defaults.

System Tests:

Select a Test...

Exits if no key

is pressed

Factory Init

Erase Memory

ENTER if APPROVE

CLEAR to EXIT

File System

Initialized to Defaults.

Press any key.