User's Manual

Scanner Setup

Installing Your Scanner

You can mount your scanner in your vehicle or use it as a base

station.

Setting up a Mobile Base

You can place your scanner on a desk, shelf, or table to use it as a

base station. Because the speaker is on the bottom of the scanner,

use the mounting bracket to elevate your scanner off the surface for

better sound.

To use the scanner on a ﬂat surface:

1. Attach the three protective

rubber feet to the

mounting bracket.

2. Slide the scanner into

the bracket, aligning

the scanner’s side holes

with the holes in the

bracket,

and then screw the

mounting

knobs into the scanner.

Bracket Mounting

You can mount your scanner under or on top of the dashboard a

desk, shelf, table or other ﬂat surface, using the mount bracket.

1. Use the supplied mounting bracket as a template to make

positions for the two mounting screws.

2. At the marked positions, drill holes slightly smaller than the

screws. When drilling holes, avoid obstructions behind the

mounting surface.