User's Manual

30
31
Creating Scannable Objects
Trunking System (TSYS) Objects
The first time you make a TGRP for a particular trunked radio
system, you must also create a TSYS object that contains the system
parameters associated with that trunked radio system. Once you
create a TSYS, you can use it over and over again without having to
re-enter all of the system data.
A TSYS object has its own set of essential parameters, and these
parameters vary depending on the type of trunked radio system
you plan to monitor. If you are a reasonably experienced user, you
probably already know what the essential parameters are for the
system you wish to monitor. For example, each TSYS must correctly
specify the type of system being monitored, the control channel
or LCN frequencies used by the system, and so on. A detailed
description of each type of system supported by this radio and
the essential parameters required to make them work properly is
provided in “Appendix B: Detailed Menu Reference: TSYS Menu” on page
106.
Note: By default all new objects are mapped to Scan List 01. Refer to
“Grouping Objects with Scan Lists” on page 39 for more information on Scan
Lists.
To create a new TSYS object.
1. Press PROG to put scanner in Program Mode.
2. Press
NEW softkey to create new object.
3. Press TGRP softkey to create a trunking system object.

> Talkgroup <
Scan Lists: *01
TSYS: NEW
Save Exit Dflt