User's Manual

44
Organizing Objects
45
Setting the Default Scan List
By default, your scanner will store all new objects, and objects found
during Search, Tune, and Stalker as mapped to Scan List 01.
You can easily change the default Scan List to any Scan List you
specify, including the special FAV and Skywarn Scan Lists.
1. Press PROG.
2. Press GLOB softkey.
3. Press q to scroll down to Dflt ScanList.
4. Enter new Scan List number to use as default scan list.
0: The “not scanned” (ns) Scan List. Objects with no Scan List
mapping.
1 - 20: Normal Scan Lists
21: FAV Scan List
22: Skywarn Scan List.
5. Press ENT or the Done softkey to store your new default Scan
List value.
6. Press SAVE softkey to save your changes.
Deleting Objects
To delete an object:
1. Press PROG to enter Program Mode.
2. Press p, q, t or u to navigate to the object you wish to delete.
3. Press FUNC CLR to delete the object.
The scanner will ask you to confirm the delete command before
removing the object from the scanner’s memory. Deletions
cannot be un-done.