User's Manual

Dedicated Searches

Dedicated Signal Stalker II

Dedicated STLK mode lets you access and run Signal Stalker II easily

and quickly.

In Manual, Program or Scan mode, press FUNC SCAN to access the

Signal Stalker II dedicated mode.

Note: When a signal is being received, the Band softkey (F1)

changes to FrL/O. You can access the Band softkey by pressing

FUNC F1 when the F1 key function is FrL/O.

Operation of the dedicated Signal Stalker II mode is almost identical

to that of the object mode, with one exception. When dedicated

Signal Stalker II mode is used, you may press the numeric key on

the keypad that corresponds with the sub-band you wish to enable

or disable. Disabling a sub-band will cause the Signal Stalker II

system to skip the frequencies within that sub-band as it performs its

sweeps.

Signal Stalker II sub-bands:

Freq. (MHz) Band

0 25-54 MHz VHF Low Band

1 108-137 VHF Aircraft Band

2 137-174 MHz VHF High Band

3 216-300 220 MHz Commercial/

Amateur Band

4 300-406 UHF Military Air Band

5 406-470 UHF Band

6 470-512 UHF-T Band

7 764-806 700 MHz Band

8 806-869 800 MHz Band

9 896-1300 MHz 900 MHz Band, 23 cm

Amateur Band