User's Manual

Weather Scanning

11. Scroll to Alarm:. You can specify different alarm sounds for this

SAME entry. We recommend that you use the default setting

here for general purpose weather alerting.

12. Scroll to Lockout:. Default is off. Lockout is a special purpose

parameter that can be used to lock out individual event or area

codes. We recommend that you leave Lockout set to off for

general purpose weather alerting.

13. When you have ﬁnished editing your SAME entry, press the Save

softkey to store the data.

14. Press the Save softkey again to save all SAME changes and

return to the Weather mode.

Note: When a SAME location/event code storage location is set

for Entry ON and Lockout ON, the radio will process the SAME

location/event code that is stored there, and will lock out the

speciﬁed event code. A SAME location/event code storage location

set for Entry: OFF and Lockout: ON will not be processed,

because Entry is set to OFF. In case of a conﬂict (i.e., two identical

codes and events are entered, and one is locked out), the locked out

entry will take precedence.

To reset SAME code to the default setting:

1. Press WX.

2. Press

SAME softkey.

3. Press p or q to select SAME code location.

4. Press SEL.

5. Press q to select code, then press Dflt softkey.

6. Press Save softkey to save the code.

7. Press Save softkey again to save changes.