User's Manual

78
79
Advanced Settings
You should experiment with the different Multi-site modes and the
threshold settings to find a combination that works best for your
location.
Notes:
• Multi-site functionality is not available in EDACS or LTR trunking.
• Threshold settings are only available when Multi-Site Roam is
selected.
• It may be necessary to change the values used for Threshold
Hi and Threshold Low in the TSYS object to optimize Multi-site
Roam performance.
LTR Home Repeater AutoMove
LTR Home Repeater AutoMove (AutoMove HRs) takes the guesswork
out of programming LTR trunking systems when the home repeater
order is not known.
By default, AutoMove HRs is turned off and is controlled in the
individual LTR TSYS objects. When AutoMove HRs is turned on, you
may enter the LTR system frequencies in any order. Your scanner will
automatically move the frequencies to the proper home repeater
slots as transmissions are received on the system.
To enable LTR Home Repeater AutoMove:
1. Access the menu for the desired TSYS.
2. Press q to scroll to
AutoMove HRs.
3. Press t or u to toggle on or off for the selected TSYS.
4. Press Save softkey to save your changes.