User's Manual

Detailed Menu Reference

GLOB

Parameter

Options Description

Contrast 1-7

Sets LCD contrast. Use   keys on 5-way

pushbutton pad.

Owner SEL Enters sub menu to set Welcome Message

text display.

Clone Send SEL Press SEL to send data using clone mode.

Alert Mode Both, Tone,

Light, Off

Controls the Alert LED and Audible Alarm

behavior. Both allows the LED and Tone.

Tone allows the audible alarm only. Light

allows the LED only. Off deactivates the

Alert LED and Audible Alarm feature.

Sound Mode On or Stlth Controls all radio beeps.

Key Beeps On or Off Controls key beeps.

Light Mode Norml, Stlth Controls the backlight operation. Norml

(Normal) causes the backlight to remain

on all the time. Stlth (Stealth) disables the

backlight.

Light Level Brit, Dim, Off

Controls backlight intensity. When Dim LED

is set to Yes, it also controls the Alert LED

intensity. Accessed from front panel using

DIM key.

Dim LED Global or Normal When on, DIM key and Light Level GLOB

menu parameter also control intensity of

Alert LED.

Atten Mode Global or Normal The attenuator reduces the amount of

signal at the receiver input. This helps

reduce interference from strong nearby

transmitters. Global attenuator mode

applies attenuation radio-wide, regardless

of individual object settings. In Normal at-

tenuator mode, the attenuator follows the

individual object attenuator setting.

Global Atten On or Off When the Atten mode is set to Global, this

controls whether the Global attenuator is

on or off.