User's Manual

11
EXTERNAL PO WER
External Power
Always turn the scanner off before
connecting or disconnecting power
sources. Use the supplied USB cable to
connect the scanner to a USB power
source (not included).
Some USB power adapters can interfere
with the scanner's reception. Using an
incompatible USB cable may damage
your scanner.
NOTE: If your vehicle’s engine is
running, you might hear electrical noise from the
engine while scanning. This is normal.
Swivel Belt C lip
Swivel clip allows the scanner to move
with you and easily move it out of the
way without unclipping it from your
belt. To attach the Swivel clip to the
scanner; align the belt clip grooves to
the slots on the back of the scanner.
Slide the clip down until it clicks in
place. To remove the belt clip, pull
back on the small tab and slide the clip
upward.
DRAFT